I. Abstract
<Insert Abstract Text here>
II. Keywords
The following are keywords to be used by search engines and document catalogues.
keyword_1, keyword_2, keyword_3, etc.
III. Preface
This document establishes the OGC CRS ontology and its submodules. The definition of elements of coordinate reference systems is an essential part of geospatial data provision. However, until now, coordinate reference systems and their components could not be represented in an OGC-standardized semantic web vocabulary. This document introduces the ontology model, its classes and properties, application examples and can serve as the foundation of a semantic web based coordinate system registry at OGC. Special attention is given to the compatibility of the CRS Ontology vocabulary to other OGC-endorsed Semantic Web standards such as GeoSPARQL and alignments to other data standards are provided as part of this specification.
NOTE: Insert Preface Text here. Give OGC specific commentary: describe the technical content, reason for document, history of the document and precursors, and plans for future work.
There are two ways to specify the Preface: “simple clause” or “full clasuse”
If the Preface does not contain subclauses, it is considered a simple preface clause. This one is entered as text after the .Preface label and must be placed between the AsciiDoc document attributes and the first AsciiDoc section title. It should not be give a section title of its own.
If the Preface contains subclauses, it needs to be encoded as a full preface clause. This one is recognized as a full Metanorma AsciiDoc section with te title “Preface”, i.e. == Preface. (Simple preface content can also be encoded like full preface.)
IV. Security Considerations
No security considerations have been made for this Standard.
V. Submitters
All questions regarding this submission should be directed to the editor or the submitters:
| Name | Affiliation | OGC member |
|---|---|---|
| Luís Moreira de Sousa | Instituto Superior Técnico: Lisbon, PT | Yes |
| Timo Homburg | Mainz University Of Applied Sciences | No |
| Nathalie Abadie | IGN France | Yes |
| Ghislain Atemezing | European Union Agency for Railways (ERA) | Yes |
VIII. Future work
NOTE: If you need to place any further sections in the preface area use the [.preface] attribute.
IX. Contributors
Additional contributors to this Standard include the following:
Individual name(s), Organization
1. Scope
<Insert Scope text here>
NOTE: Give the subject of the document and the aspects of that scope covered by the document.
2. Conformance
<Insert conformance content here>
NOTE: Provide a short description of the content approached in subsequent sections and the main subject of the document
3. Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
Identification of Common Molecular Subsequences. Smith, T.F., Waterman, M.S., J. Mol. Biol. 147, 195–197 (1981)
ZIB Structure Prediction Pipeline: Composing a Complex Biological Workflow through Web Services. May, P., Ehrlich, H.C., Steinke, T. In: Nagel, W.E., Walter, W.V., Lehner, W. (eds.) Euro-Par 2006. LNCS, vol. 4128, pp. 1148–1158. Springer, Heidelberg (2006)
The Grid: Blueprint for a New Computing Infrastructure., Foster, I., Kesselman, C.. Morgan Kaufmann, San Francisco (1999).
Grid Information Services for Distributed Resource Sharing. Czajkowski, K., Fitzgerald, S., Foster, I., Kesselman, C. In: 10th IEEE International Symposium on High Performance Distributed Computing, pp. 181–184. IEEE Press, New York (2001)
4. Terms and definitions
This document uses the terms defined in OGC Policy Directive 49, which is based on the ISO/IEC Directives, Part 2, Rules for the structure and drafting of International Standards. In particular, the word “shall” (not “must”) is the verb form used to indicate a requirement to be strictly followed to conform to this document and OGC documents do not use the equivalent phrases in the ISO/IEC Directives, Part 2.
This document also uses terms defined in the OGC Standard for Modular specifications (OGC 08-131r3), also known as the ‘ModSpec’. The definitions of terms such as standard, specification, requirement, and conformance test are provided in the ModSpec.
For the purposes of this document, the following additional terms and definitions apply.
term used for exemplary purposes
Note 1 to entry: An example note.
Example
Here’s an example of an example term.
[SOURCE: ]
5. Conventions
NOTE: This section provides details and examples for any conventions used in the document. Examples of conventions are symbols, abbreviations, use of XML schema, or special notes regarding how to read the document.
5.1. Identifiers
The normative provisions in this standard are denoted by the URI
http://www.opengis.net/spec/{standard}/{m.n}
All requirements and conformance tests that appear in this document are denoted by partial URIs which are relative to this base.
5.2. Other conventions
<Place any other convention needed with its corresponding title>
6. Core
This clause establishes the Core Requirements class, with IRI /req/core, which has a corresponding Conformance Class, Core, with IRI /conf/core.
The Core module establishes a set of classes and properties which define the building blocks of a spatial reference system definition. Some of the definitions are extended in specialized modules related to the Core module.
Figure 1
From a base class SpatialReferenceSystem, we define a class for a coordinate system, as the superclass of all spatial reference systems describing locations using coorindates. These SpatialReferenceSystems are described using a Datum and a coordinate system definitions with at least one coordinate axis. Together with several subtypes of coordnate reference system, these definitions complete the Core module.
| Identifier | /req/core |
|---|---|
| Target type | Implementation Specification |
| Conformance class | Conformance class A.1: /conf/core |
| requirement | /req/core/Coordinate_Reference_System_Parameters /req/core/Coordinate_Reference_System_Types /req/core/Coordinate_Reference_System_Properties |
6.1. Coordinate Reference System Parameters
| Identifier | /req/core/Coordinate_Reference_System_Parameters |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:AreaOfUse, geosrs:Extent, geosrs:GeographicBoundingBox, geosrs:AxesList, geosrs:SingleCRSList to be used in SPARQL graph patterns. |
6.1.1. Class: geosrs:AreaOfUse
Table — geosrs:AreaOfUse
| URI | https://w3id.org/geosrs/srs/AreaOfUse |
| Definition | Area within which a coordinate operation may be used. |
| Super-classes | geo:Feature[geo:Feature] |
| Example | geosrs:AreaOfUse |
6.1.2. Class: geosrs:Extent
Table — geosrs:Extent
| URI | https://w3id.org/geosrs/srs/Extent |
| Definition | Geographic area or time interval in which the referring object is valid. Cf. ISO 19115-1:2014:2014-04, part 6.6.1 and table B.15 line 335. |
6.1.3. Class: geosrs:GeographicBoundingBox
Table — geosrs:GeographicBoundingBox
| URI | https://w3id.org/geosrs/srs/GeographicBoundingBox |
| Definition | Frame delimiting an area of interest. See ISO 19115-1:2014:2014-04, part 6.6.1 and table B.15.1 line 344. |
6.1.4. Class: geosrs:AxesList
Table — geosrs:AxesList
| URI | https://w3id.org/geosrs/srs/AxesList |
| Definition | Ordered list of coordinate system axes. |
6.1.5. Class: geosrs:SingleCRSList
Table — geosrs:SingleCRSList
| URI | https://w3id.org/geosrs/srs/SingleCRSList |
| Definition | Ordered list of simple reference coordinate systems. |
6.2. Coordinate Reference System Properties
| Identifier | /req/core/Coordinate_Reference_System_Properties |
|---|---|
| Statement | Implementations shall allow the RDFS properties geosrs:method to be used in SPARQL graph patterns. |
6.2.1. Property: geosrs:method
Table — geosrs:method
| URI | https://w3id.org/geosrs/method |
| Type | owl:ObjectProperty |
| Range | CoordinateOperation |
| Domain | CRS |
6.3. Coordinate Reference System Types
| Identifier | /req/core/Coordinate_Reference_System_Types |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:BoundCRS, geosrs:CompoundCRS, geosrs:CRS, geosrs:EngineeringCRS, geosrs:GeocentricCRS, geosrs:GeodeticCRS, geosrs:GeographicCRS, geosrs:ParametricCRS, geosrs:ProjectedCRS, geosrs:SelenographicCRS, geosrs:ReferenceSystem, geosrs:SingleCRS, geosrs:SpatialReferenceSystem, geosrs:SpatioParametricCompoundCRS, geosrs:SpatioParametricTemporalCompoundCRS, geosrs:SpatioTemporalCompoundCRS, geosrs:StaticCRS, geosrs:TemporalCRS, geosrs:VerticalCRS to be used in SPARQL graph patterns. |
Coordinate reference systems are typed according to their area of application, e.g. Geodetic vs. Engineering vs. TemporalCRS and by their ability to contain further
6.3.1. Class: geosrs:BoundCRS
Table — geosrs:BoundCRS
| URI | https://w3id.org/geosrs/srs/BoundCRS |
| Super-classes | CRS |
6.3.2. Class: geosrs:CompoundCRS
Table — geosrs:CompoundCRS
| URI | https://w3id.org/geosrs/srs/CompoundCRS |
| Definition | Coordinate reference system using at least two independent single coordinate reference systems. Cf. ISO 19111:2007:2007-07, parts 8.2.3.c, 8.2.4, table 6 and annex B.1.2.4. |
| Super-classes | CRS |
| Example | geosrs:CompoundCRS |
6.3.3. Class: geosrs:CRS
Table — geosrs:CRS
| URI | https://w3id.org/geosrs/srs/CRS |
| Definition | Depending on the spatial dimension of coordinates (1D, 2D, 3D), this piece of metadata is used for specifying the elements of definition associated to a given set of coordinates: its datum, its ellipsoid, its prime meridian, the type of coordinates (geocentric, geographic, projected,…), the coordinates units of measure, when appropriate the cartographic projection used, the vertical coordinate reference system. |
| Super-classes | SpatialReferenceSystem |
6.3.4. Class: geosrs:EngineeringCRS
Table — geosrs:EngineeringCRS
| URI | https://w3id.org/geosrs/srs/EngineeringCRS |
| Definition | A contextually local coordinate reference system which can be divided into two broad categories: — earth-fixed systems applied to engineering activities on or near the surface of the earth; — CRSs on moving platforms such as road vehicles, vessels, aircraft or spacecraft. |
| Super-classes | CRS |
6.3.5. Class: geosrs:GeocentricCRS
Table — geosrs:GeocentricCRS
| URI | https://w3id.org/geosrs/srs/GeocentricCRS |
| Definition | A cartesian coordinate reference system that represents locations in the vicinity of the Earth (including its surface, interior, atmosphere, and surrounding outer space) as X, Y, and Z measurements from its center of mass. Commonly used to track the orbits of satellites. |
| Super-classes | CRS |
| Example | geosrs:GeocentricCRS |
6.3.6. Class: geosrs:GeodeticCRS
Table — geosrs:GeodeticCRS
| URI | https://w3id.org/geosrs/srs/GeodeticCRS |
| Definition | Coordinate Reference System associated with a geodetic datum. Cf. ISO 19111:2007:2007-07, part 8.2.2.a, table 10 and annex B.1.2.1.a. |
| Super-classes | CRS |
6.3.7. Class: geosrs:GeographicCRS
Table — geosrs:GeographicCRS
| URI | https://w3id.org/geosrs/srs/GeographicCRS |
| Definition | Coordinate Reference System that has a geodetic reference frame and an ellipsoidal coordinate system |
| Super-classes | CRS |
| Example | geosrs:GeographicCRS |
6.3.8. Class: geosrs:ParametricCRS
Table — geosrs:ParametricCRS
| URI | https://w3id.org/geosrs/srs/ParametricCRS |
| Definition | Coordinate Reference System based on a parametric datum |
| Super-classes | CRS |
6.3.9. Class: geosrs:ProjectedCRS
Table — geosrs:ProjectedCRS
| URI | https://w3id.org/geosrs/srs/ProjectedCRS |
| Definition | Coordinate Reference System derived from a two-dimensional geodetic coordinate reference system by applying a map projection. Cf. ISO 19111:2007:2007-07, part 8.2.3.b, table 11 and annex B.1.2.3. |
| Super-classes | CRS |
| Example | geosrs:ProjectedCRS |
6.3.10. Class: geosrs:SelenographicCRS
Table — geosrs:SelenographicCRS
| URI | https://w3id.org/geosrs/srs/SelenographicCRS |
| Definition | Coordinate Reference System to refer locations on the surface of the Earth’s Moon. |
| Super-classes | CRS |
6.3.11. Class: geosrs:ReferenceSystem
Table — geosrs:ReferenceSystem
| URI | https://w3id.org/geosrs/srs/ReferenceSystem |
| Definition | An abstract coordinate system, whose origin, orientation and scale are specified in physical space. It is based on a set of reference points, defined as geometric points whose position is identified physically and mathematically. |
6.3.12. Class: geosrs:SingleCRS
Table — geosrs:SingleCRS
| URI | https://w3id.org/geosrs/srs/SingleCRS |
| Definition | Coordinate reference system consisting of one coordinate system and one datum. Cf. ISO 19111:2007:2007-07, table 5. |
| Super-classes | CRS |
6.3.13. Class: geosrs:SpatialReferenceSystem
Table — geosrs:SpatialReferenceSystem
| URI | https://w3id.org/geosrs/srs/SpatialReferenceSystem |
| Definition | A spatial reference system (SRS) is a system for establishing spatial position. A spatial reference system can use geographic identifiers (place names, for example), coordinates (in which case it is a coordinate reference system), or identifiers with structured geometry (in which case it is a discrete global grid system). |
| Super-classes | ReferenceSystem |
6.3.14. Class: geosrs:SpatioParametricCompoundCRS
Table — geosrs:SpatioParametricCompoundCRS
| URI | https://w3id.org/geosrs/srs/SpatioParametricCompoundCRS |
| Definition | A spatio-parametric coordinate reference system is a compound CRS in which one component is a geographic 2D, projected 2D or engineering 2D CRS, supplemented by a parametric CRS to create a three-dimensional CRS |
| Super-classes | CompoundCRS |
6.3.15. Class: geosrs:SpatioParametricTemporalCompoundCRS
Table — geosrs:SpatioParametricTemporalCompoundCRS
| URI | https://w3id.org/geosrs/srs/SpatioParametricTemporalCompoundCRS |
| Definition | Coordinate reference system combining a spatio-parametric reference system with at least one temporal reference system |
| Super-classes | SpatioParametricCompoundCRS |
6.3.16. Class: geosrs:SpatioTemporalCompoundCRS
Table — geosrs:SpatioTemporalCompoundCRS
| URI | https://w3id.org/geosrs/srs/SpatioTemporalCompoundCRS |
| Definition | Coordinate reference system combining a spatial reference system with at least one temporal reference system |
| Super-classes | CompoundCRS |
6.3.17. Class: geosrs:StaticCRS
Table — geosrs:StaticCRS
| URI | https://w3id.org/geosrs/srs/StaticCRS |
| Definition | Coordinate Reference System that has a static reference frame |
| Super-classes | CRS |
6.3.18. Class: geosrs:TemporalCRS
Table — geosrs:TemporalCRS
| URI | https://w3id.org/geosrs/srs/TemporalCRS |
| Definition | Coordinate Reference System based on a temporal datum |
| Super-classes | CRS |
6.3.19. Class: geosrs:VerticalCRS
Table — geosrs:VerticalCRS
| URI | https://w3id.org/geosrs/srs/VerticalCRS |
| Definition | One-dimensional coordinate reference system associated with a vertical datum and used for recording heights or depths.Ellipsoidal heights are not captured in a vertical coordinate reference system but as part of a 3D coordinates tuple defined in a geodetic 3D coordinate reference system. Cf. ISO 19111:2007:2007-07, parts 8.2.2.b, table 14 and annex B.1.2.1.b. |
| Super-classes | CRS |
| Example | geosrs:VerticalCRS |
7. Coordinate Operation Module
This clause establishes the Co Requirements class, with IRI /req/co, which has a corresponding Conformance Class, Co, with IRI /conf/co.
Figure 2
| Identifier | /req/co |
|---|---|
| Target type | Implementation Specification |
| Conformance class | Conformance class A.2: /conf/co |
| requirement | /req/co/Coordinate_Operation_Methods /req/co/Coordinate_Operation_Parameters /req/co/Coordinate_Operation_Categories /req/co/Coordinate_Operation_Properties |
7.1. Coordinate Operation Categories
| Identifier | /req/co/Coordinate_Operation_Categories |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:GeographicObject, geosrs:RegisterOperations, geosrs:ScaleOperation, geosrs:RotationOperation, geosrs:IdentityOperation, geosrs:ShearOperation, geosrs:TranslationOperation, geosrs:AffineTransformationOperation, geosrs:CoordinateTransformationOperation to be used in SPARQL graph patterns. |
7.1.1. Class: geosrs:GeographicObject
Table — geosrs:GeographicObject
| URI | https://w3id.org/geosrs/co/GeographicObject |
| Definition | Identifier of a geographic feature of which the coordinates are used as operation parameters. |
| Super-classes | Geometry#Geometry |
7.1.2. Class: geosrs:RegisterOperations
Table — geosrs:RegisterOperations
| URI | https://w3id.org/geosrs/co/RegisterOperations |
| Definition | Operations supported in the Coordinate Operations package. |
7.1.3. Class: geosrs:ScaleOperation
Table — geosrs:ScaleOperation
| URI | https://w3id.org/geosrs/co/ScaleOperation |
| Definition | Scale transformation operation |
| Super-classes | AffineTransformationOperation |
7.1.4. Class: geosrs:RotationOperation
Table — geosrs:RotationOperation
| URI | https://w3id.org/geosrs/co/RotationOperation |
| Definition | Rotation transformation operation |
| Super-classes | AffineTransformationOperation |
7.1.5. Class: geosrs:IdentityOperation
Table — geosrs:IdentityOperation
| URI | https://w3id.org/geosrs/co/IdentityOperation |
| Definition | Identity transformation operation |
| Super-classes | AffineTransformationOperation |
7.1.6. Class: geosrs:ShearOperation
Table — geosrs:ShearOperation
| URI | https://w3id.org/geosrs/co/ShearOperation |
| Definition | Shear transformation operation |
| Super-classes | AffineTransformationOperation |
7.1.7. Class: geosrs:TranslationOperation
Table — geosrs:TranslationOperation
| URI | https://w3id.org/geosrs/co/TranslationOperation |
| Definition | Translation transformation operation |
| Super-classes | AffineTransformationOperation |
7.1.8. Class: geosrs:AffineTransformationOperation
Table — geosrs:AffineTransformationOperation
| URI | https://w3id.org/geosrs/co/AffineTransformationOperation |
| Definition | Affine coordinate transformation operation |
| Super-classes | CoordinateTransformationOperation [] |
7.1.9. Class: geosrs:CoordinateTransformationOperation
Table — geosrs:CoordinateTransformationOperation
| URI | https://w3id.org/geosrs/co/CoordinateTransformationOperation |
| Definition | Coordinate operation in which the two coordinate reference systems are based on different datums. |
| Super-classes | SingleOperation |
7.2. Coordinate Operation Methods
| Identifier | /req/co/Coordinate_Operation_Methods |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:CoordinateOperation, geosrs:PassThroughOperation, geosrs:ConcatenatedOperation, geosrs:SingleOperation, geosrs:Transformation, geosrs:Conversion, geosrs:PointMotionOperation, geosrs:OperationMethod to be used in SPARQL graph patterns. |
7.2.1. Class: geosrs:PassThroughOperation
Table — geosrs:PassThroughOperation
| URI | https://w3id.org/geosrs/co/PassThroughOperation |
| Definition | Specification of a subset of coordinate tuples that is subject to a coordinate operation |
| Super-classes | CoordinateOperation |
7.2.2. Class: geosrs:ConcatenatedOperation
Table — geosrs:ConcatenatedOperation
| URI | https://w3id.org/geosrs/co/ConcatenatedOperation |
| Definition | Ordered sequence of two or more single coordinate operations. Note: The sequence of coordinate operations is constrained by the requirement that the source coordinate reference system of step (n + 1) shall be the same as the target coordinate reference system of step (n). The source coordinate reference system of the first step and the target coordinate reference system of the last step are the source and target coordinate reference system associated with the concatenated coordinate operation. For a concatenated coordinate operation sequence of n coordinate operations: source CRS (concatenated coordinate operation) .eq. source CRS (coordinate operation step 1) target CRS (coordinate operation step i) .eq. source CRS (coordinate operation step i + 1); i .eq. 1 …(n — 1) target CRS (concatenated coordinate operation) .eq. target CRS (coordinate operation step n) Instead of a forward coordinate operation, an inverse coordinate operation may be used for one or more of the coordinate operation steps mentioned above, if the inverse coordinate operation is uniquely defined by the forward coordinate operation method. |
| Super-classes | CoordinateOperation |
7.2.3. Class: geosrs:PointMotionOperation
Table — geosrs:PointMotionOperation
| URI | https://w3id.org/geosrs/co/PointMotionOperation |
| Definition | Mathematical operation that decribes the change of coordinate values within one coordinate reference system due to the motion of the point between one coordinate epoch and another coordinate epoch Note: In this document the motion is due to tectonic plate movement or deformation. |
| Super-classes | SingleOperation |
7.3. Coordinate Operation Parameters
| Identifier | /req/co/Coordinate_Operation_Parameters |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:GeneralOperationParameter, geosrs:OperationParameterGroup, geosrs:OperationParameter, geosrs:GeneralParameterValue, geosrs:ParameterValueGroup, geosrs:OperationParameterValue to be used in SPARQL graph patterns. |
7.3.1. Class: geosrs:OperationParameterGroup
Table — geosrs:OperationParameterGroup
| URI | https://w3id.org/geosrs/co/OperationParameterGroup |
| Definition | Definition of a group of related parameters used by a coordinate operation method. |
| Super-classes | GeneralOperationParameter |
7.3.2. Class: geosrs:ParameterValueGroup
Table — geosrs:ParameterValueGroup
| URI | https://w3id.org/geosrs/co/ParameterValueGroup |
| Definition | Group of related parameter values. Note: The same group can be repeated more than once in a coordinate operation or higher level ParameterValueGroup, if those instances contain different values of one or more ParameterValues which suitably distinguish among those groups. |
| Super-classes | GeneralParameterValue |
7.4. Coordinate Operation Properties
| Identifier | /req/co/Coordinate_Operation_Properties |
|---|---|
| Statement | Implementations shall allow the RDFS properties geosrs:derivingConversion, geosrs:parameter, geosrs:sourceCRS, geosrs:targetCRS to be used in SPARQL graph patterns. |
7.4.1. Property: geosrs:derivingConversion
Table — geosrs:derivingConversion
| URI | https://w3id.org/geosrs/co/derivingConversion |
| Type | owl:ObjectProperty |
| Definition | Relates a derived CRS to a conversion |
| Range | Conversion |
| Domain | DerivedCRS |
7.4.2. Property: geosrs:parameter
Table — geosrs:parameter
| URI | https://w3id.org/geosrs/co/parameter |
| Type | owl:ObjectProperty |
| Definition | Value of the datum-defining parameter |
| Range | OperationParameter |
| Domain | Conversion |
7.4.3. Property: geosrs:sourceCRS
Table — geosrs:sourceCRS
| URI | https://w3id.org/geosrs/co/sourceCRS |
| Type | owl:ObjectProperty |
| Definition | The coordinate reference system associated to the data used as input of a given operation. Cf. ISO 19111:2007:2007-07, table 42, named association Source. |
| Range | CRS |
| Domain | CoordinateOperation |
| Example | geosrs:sourceCRS |
7.4.4. Property: geosrs:targetCRS
Table — geosrs:targetCRS
| URI | https://w3id.org/geosrs/co/targetCRS |
| Type | owl:ObjectProperty |
| Definition | The coordinate reference system associated to the data obtained as output of a given operation. Cf. ISO 19111:2007:2007-07, table 42, named association Target. |
| Range | CRS |
| Domain | CoordinateOperation |
8. Coordinate System Module
This clause establishes the CS Requirements class, with IRI /req/cs, which has a corresponding Conformance Class, CS, with IRI /conf/cs.
Figure 3
The coordinate system module introduces different types of coordinate systems which are dinstinguished in geospatial science and applications. Coordinate systems are distinguished by their area of use, i.e planetary or interstellar and by their multidimensionality.
| Identifier | /req/cs |
|---|---|
| Target type | Implementation Specification |
| Conformance class | Conformance class A.3: /conf/cs |
| requirement | /req/cs/Temporal_Coordinate_Systems /req/cs/3D_Coordinate_Systems /req/cs/Coordinate_System_Types /req/cs/Celestial_Coordinate_Systems /req/cs/Coordinate_System_Components /req/cs/Coordinate_System_Properties |
8.1. 3D Coordinate Systems
| Identifier | /req/cs/3D_Coordinate_Systems |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:3DCoordinateSystem, geosrs:ConicalCoordinateSystem, geosrs:CylindricalCoordinateSystem, geosrs:EllipsoidalCoordinateSystem, geosrs:SphericalCoordinateSystem to be used in SPARQL graph patterns. |
8.1.1. Class: geosrs:3DCoordinateSystem
The class geosrs:3DCoordinateSystem describes a coordinate system in three dimesions. These coordinate systems are common for 3D representations or 2D representations with a time aspect.
Table — geosrs:3DCoordinateSystem
| URI | https://w3id.org/geosrs/cs/3DCoordinateSystem |
| Definition | Non-repeating sequence of coordinate system axes that spans a given coordinate space in three dimensions |
| Super-classes | CoordinateSystem |
| Example | geosrs:3DCoordinateSystem |
8.1.2. Class: geosrs:ConicalCoordinateSystem
Table — geosrs:ConicalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/ConicalCoordinateSystem |
| Definition | A conical coordinate system is a three-dimensional orthogonal coordinate system consisting of concentric spheres (described by their radius r) and by two families of perpendicular cones, aligned along the z- and x-axes, respectively |
| Super-classes | OrthogonalCoordinateSystem |
8.1.3. Class: geosrs:CylindricalCoordinateSystem
Table — geosrs:CylindricalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/CylindricalCoordinateSystem |
| Definition | Three-dimensional coordinate system in Euclidean space in which position is specified by two linear coordinates and one angular coordinate |
| Super-classes | 3DCoordinateSystem |
8.2. Celestial Coordinate Systems
| Identifier | /req/cs/Celestial_Coordinate_Systems |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:CelestialCoordinateSystem, geosrs:EclipticCoordinateSystem, geosrs:EquatorialCoordinateSystem, geosrs:GalacticCoordinateSystem, geosrs:HorizontalCoordinateSystem, geosrs:PerifocalCoordinateSystem, geosrs:SuperGalacticCS to be used in SPARQL graph patterns. |
8.2.1. Class: geosrs:CelestialCoordinateSystem
Table — geosrs:CelestialCoordinateSystem
| URI | https://w3id.org/geosrs/cs/CelestialCoordinateSystem |
| Definition | A coordinate system for specifying positions of celestial objects relative to physical reference points |
| Super-classes | CoordinateSystem |
8.2.2. Class: geosrs:EclipticCoordinateSystem
Table — geosrs:EclipticCoordinateSystem
| URI | https://w3id.org/geosrs/cs/EclipticCoordinateSystem |
| Definition | An ecliptic coordinate system is used for representing the apparent positions and orbits of solar system objects. |
| Super-classes | CelestialCoordinateSystem |
8.2.3. Class: geosrs:EquatorialCoordinateSystem
Table — geosrs:EquatorialCoordinateSystem
| URI | https://w3id.org/geosrs/cs/EquatorialCoordinateSystem |
| Definition | A celestial coordinate system in which an object’s position on the celestial sphere is described in terms of its north-south declination and east-west right ascension, measured relative to the celestial equator and vernal equinox, respectively. |
| Super-classes | CelestialCoordinateSystem |
8.2.4. Class: geosrs:GalacticCoordinateSystem
Table — geosrs:GalacticCoordinateSystem
| URI | https://w3id.org/geosrs/cs/GalacticCoordinateSystem |
| Definition | A coordinate system with the Sun as its center, the primary direction aligned with the approximate center of the Milky Way Galaxy, and the fundamental plane parallel to an approximation of the galactic plane but offset to its north. |
| Super-classes | CelestialCoordinateSystem 3DCoordinateSystem |
8.2.5. Class: geosrs:HorizontalCoordinateSystem
Table — geosrs:HorizontalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/HorizontalCoordinateSystem |
| Definition | A horizontal coordinate system is a celestial coordinate system that uses the observer’s local horizon as the fundamental plane. |
| Super-classes | CelestialCoordinateSystem |
8.2.6. Class: geosrs:PerifocalCoordinateSystem
Table — geosrs:PerifocalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/PerifocalCoordinateSystem |
| Definition | A frame of reference centered at the focus of the orbit, i.e. the celestial body about which the orbit is centered. |
| Super-classes | CelestialCoordinateSystem |
8.2.7. Class: geosrs:SuperGalacticCS
Table — geosrs:SuperGalacticCS
| URI | https://w3id.org/geosrs/cs/SuperGalacticCS |
| Definition | A reference frame for the supercluster of galaxies that contains the Milky Way galaxy, referenced to a local relatively flat collection of galaxy clusters used to define the supergalactic plane. |
| Super-classes | CelestialCoordinateSystem 3DCoordinateSystem |
8.3. Coordinate System Components
| Identifier | /req/cs/Coordinate_System_Components |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:CoordinateSystemAxis to be used in SPARQL graph patterns. |
8.4. Coordinate System Properties
| Identifier | /req/cs/Coordinate_System_Properties |
|---|---|
| Statement | Implementations shall allow the RDFS properties geosrs:axis, geosrs:axisDirection to be used in SPARQL graph patterns. |
8.4.1. Property: geosrs:axis
Table — geosrs:axis
| URI | https://w3id.org/geosrs/cs/axis |
| Type | owl:ObjectProperty |
| Definition | The property relates a coordinate system to one of its axis |
| Range | Axis |
| Domain | CoordinateSystem |
8.4.2. Property: geosrs:axisDirection
Table — geosrs:axisDirection
| URI | https://w3id.org/geosrs/cs/axisDirection |
| Type | owl:ObjectProperty |
| Definition | The direction of an axis. Cf. ISO 19111:2007:2007-07, table 27, attribute coordinate system axis direction. |
| Range | AxisDirection |
| Domain | Axis |
| Example | geosrs:axisDirection |
8.5. Coordinate System Types
| Identifier | /req/cs/Coordinate_System_Types |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:CoordinateSystem, geosrs:AffineCoordinateSystem, geosrs:BarycentricCoordinateSystem, geosrs:CartesianCoordinateSystem, geosrs:CurvilinearCoordinateSystem, geosrs:EngineeringCoordinateSystem, geosrs:GeodeticCoordinateSystem, geosrs:GeographicalCoordinateSystem, geosrs:GridCoordinateSystem, geosrs:HexagonalCoordinateSystem, geosrs:LinearCoordinateSystem, geosrs:LocalCoordinateSystem, geosrs:ObliqueCoordinateSystem, geosrs:OrdinalCoordinateSystem, geosrs:OrthogonalCoordinateSystem, geosrs:ParametricCoordinateSystem, geosrs:PlanarCoordinateSystem, geosrs:PolarCoordinateSystem, geosrs:VerticalCoordinateSystem to be used in SPARQL graph patterns. |
8.5.1. Class: geosrs:AffineCoordinateSystem
Table — geosrs:AffineCoordinateSystem
| URI | https://w3id.org/geosrs/cs/AffineCoordinateSystem |
| Definition | Coordinate system in Euclidean space with straight axes that are not necessarily mutually perpendicular |
| Super-classes | CoordinateSystem |
8.5.2. Class: geosrs:BarycentricCoordinateSystem
Table — geosrs:BarycentricCoordinateSystem
| URI | https://w3id.org/geosrs/cs/BarycentricCoordinateSystem |
| Definition | A coordinate system in which the location of a point is specified by reference to a simplex (a triangle for points in a plane, a tetrahedron for points in three-dimensional space, etc.) |
| Super-classes | CoordinateSystem |
8.5.3. Class: geosrs:CurvilinearCoordinateSystem
Table — geosrs:CurvilinearCoordinateSystem
| URI | https://w3id.org/geosrs/cs/CurvilinearCoordinateSystem |
| Definition | A coordinate system for the Euclidean space in which the coordinate lines may be curved |
| Super-classes | CoordinateSystem |
8.5.4. Class: geosrs:EngineeringCoordinateSystem
Table — geosrs:EngineeringCoordinateSystem
| URI | https://w3id.org/geosrs/cs/EngineeringCoordinateSystem |
| Definition | Coordinate system used by an engineering coordinate reference system, one of an affine coordinate system, a Cartesian coordinate system, a cylindrical coordinate system, a linear coordinate sytem, an ordinal coordinate system, a polar coordinate system or a spherical coordinate system |
| Super-classes | CoordinateSystem |
8.5.5. Class: geosrs:GeodeticCoordinateSystem
Table — geosrs:GeodeticCoordinateSystem
| URI | https://w3id.org/geosrs/cs/GeodeticCoordinateSystem |
| Definition | Coordinate system used by a Geodetic CRS, one of a Cartesian coordinate system or a spherical coordinate system. |
| Super-classes | CoordinateSystem |
8.5.6. Class: geosrs:GeographicalCoordinateSystem
Table — geosrs:GeographicalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/GeographicalCoordinateSystem |
| Definition | Spherical or geodetic coordinate system for measuring and communicating positions directly on Earth as latitude and longitude. |
| Super-classes | SphericalCoordinateSystem GeodeticCoordinateSystem |
8.5.7. Class: geosrs:GridCoordinateSystem
Table — geosrs:GridCoordinateSystem
| URI | https://w3id.org/geosrs/cs/GridCoordinateSystem |
| Definition | A grid coordinate system identifies areas within a grid. |
| Super-classes | CoordinateSystem |
8.5.8. Class: geosrs:HexagonalCoordinateSystem
Table — geosrs:HexagonalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/HexagonalCoordinateSystem |
| Definition | A hexagonal coordinate system identifies areas within a hexagonal lattice. |
| Super-classes | GridCoordinateSystem |
8.5.9. Class: geosrs:LocalCoordinateSystem
Table — geosrs:LocalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/LocalCoordinateSystem |
| Definition | Coordinate system with a point of local reference. |
| Super-classes | CoordinateSystem |
8.5.10. Class: geosrs:ObliqueCoordinateSystem
Table — geosrs:ObliqueCoordinateSystem
| URI | https://w3id.org/geosrs/cs/ObliqueCoordinateSystem |
| Definition | A plane coordinate system whose axes are not perpendicular. |
| Super-classes | CoordinateSystem |
8.5.11. Class: geosrs:OrthogonalCoordinateSystem
Table — geosrs:OrthogonalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/OrthogonalCoordinateSystem |
| Definition | A orthogonal coordinate system is a system of curvilinear coordinates in which each family of surfaces intersects the others at right angles. |
| Super-classes | CurvilinearCoordinateSystem |
8.5.12. Class: geosrs:PlanarCoordinateSystem
Table — geosrs:PlanarCoordinateSystem
| URI | https://w3id.org/geosrs/cs/PlanarCoordinateSystem |
| Definition | A two-dimensional measurement system that locates features on a plane based on their distance from an origin (0,0) along two perpendicular axes. |
| Super-classes | CoordinateSystem |
| Example | geosrs:PlanarCoordinateSystem |
8.6. Temporal Coordinate Systems
| Identifier | /req/cs/Temporal_Coordinate_Systems |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:1DCoordinateSystem, geosrs:DateTimeTemporalCoordinateSystem, geosrs:TemporalCountCoordinateSystem, geosrs:TemporalCoordinateSystem, geosrs:TemporalMeasureCoordinateSystem to be used in SPARQL graph patterns. |
8.6.1. Class: geosrs:1DCoordinateSystem
The class geosrs:1DCoordinateSystem describes a coordinate system with only one dimension. Often, these definitions include temporal coordinate systems which only represent time using one coordinate system axis.
Table — geosrs:1DCoordinateSystem
| URI | https://w3id.org/geosrs/cs/1DCoordinateSystem |
| Definition | Non-repeating sequence of coordinate system axes that spans a given coordinate space in one dimension |
| Super-classes | CoordinateSystem |
8.6.2. Class: geosrs:DateTimeTemporalCoordinateSystem
Table — geosrs:DateTimeTemporalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/DateTimeTemporalCoordinateSystem |
| Definition | One-dimensional coordinate system used to record time in dateTime representation as defined in ISO 8601. |
| Super-classes | TemporalCoordinateSystem |
8.6.3. Class: geosrs:TemporalCountCoordinateSystem
Table — geosrs:TemporalCountCoordinateSystem
| URI | https://w3id.org/geosrs/cs/TemporalCountCoordinateSystem |
| Definition | One-dimensional coordinate system used to record time as an integer count. |
| Super-classes | TemporalCoordinateSystem |
8.6.4. Class: geosrs:TemporalCoordinateSystem
Table — geosrs:TemporalCoordinateSystem
| URI | https://w3id.org/geosrs/cs/TemporalCoordinateSystem |
| Definition | One-dimensionalcoordinate system where the axis is time. |
| Super-classes | 1DCoordinateSystem |
8.6.5. Class: geosrs:TemporalMeasureCoordinateSystem
Table — geosrs:TemporalMeasureCoordinateSystem
| URI | https://w3id.org/geosrs/cs/TemporalMeasureCoordinateSystem |
| Definition | One-dimensional coordinate system used to record a time as a real number. |
| Super-classes | TemporalCoordinateSystem |
9. Datum Module
This clause establishes the Datum Requirements class, with IRI /req/datum, which has a corresponding Conformance Class, Datum, with IRI /conf/datum.
Figure 4
| Identifier | /req/datum |
|---|---|
| Target type | Implementation Specification |
| Conformance class | Conformance class A.4: /conf/datum |
| requirement | /req/datum/Datum_Types /req/datum/Datum_Parameters /req/datum/Spheroid_Types /req/datum/Spheroid_Properties /req/datum/Datum_Properties |
9.1. Datum Parameters
| Identifier | /req/datum/Datum_Parameters |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:PrimeMeridian, geosrs:DefiningParameter to be used in SPARQL graph patterns. |
9.1.1. Class: geosrs:DefiningParameter
Table — geosrs:DefiningParameter
| URI | https://w3id.org/geosrs/datum/DefiningParameter |
| Definition | Parameter value, an ordered sequence of values, or a reference to a file of parameter values that define a paramtric datum. Cf. ISO 19111:2019 Geographic information — Referencing by coordinates. |
9.2. Datum Properties
| Identifier | /req/datum/Datum_Properties |
|---|---|
| Statement | Implementations shall allow the RDFS properties geosrs:datumDefiningParameter, geosrs:ellipsoid, geosrs:primeMeridian to be used in SPARQL graph patterns. |
9.2.1. Property: geosrs:datumDefiningParameter
Table — geosrs:datumDefiningParameter
| URI | https://w3id.org/geosrs/datum/datumDefiningParameter |
| Type | owl:ObjectProperty |
| Definition | Parameter used to define the parametric datum |
| Range | DefiningParameter |
| Domain | ParametricDatum |
9.2.2. Property: geosrs:ellipsoid
Table — geosrs:ellipsoid
| URI | https://w3id.org/geosrs/datum/ellipsoid |
| Type | owl:ObjectProperty |
| Definition | The properties relates a datum to its ellipsoid definition |
| Range | Ellipsoid |
| Domain | Datum |
| Example | geosrs:ellipsoid |
9.2.3. Property: geosrs:primeMeridian
Table — geosrs:primeMeridian
| URI | https://w3id.org/geosrs/datum/primeMeridian |
| Type | owl:ObjectProperty |
| Definition | The prime meridian used by a geodetic datum. Cf. ISO 19111:2007:2007-07, table 34, association role primeMeridian. |
| Range | PrimeMeridian |
| Domain | Datum |
| Example | geosrs:primeMeridian |
9.3. Datum Types
| Identifier | /req/datum/Datum_Types |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:Datum, geosrs:GeodeticDatum, geosrs:DynamicGeodeticReferenceFrame, geosrs:VerticalDatum, geosrs:DynamicVerticalDatum, geosrs:ParametricDatum, geosrs:EngineeringDatum, geosrs:TemporalDatum, geosrs:DatumEnsemble to be used in SPARQL graph patterns. |
9.3.1. Class: geosrs:DynamicGeodeticReferenceFrame
Table — geosrs:DynamicGeodeticReferenceFrame
| URI | https://w3id.org/geosrs/datum/DynamicGeodeticReferenceFrame |
| Definition | Geodetic reference frame in which some of the parameters describe time evolution of defining station coordinatesExample: defining station coordinates having linear velocities to account for crustal motion. |
| Super-classes | GeodeticDatum |
9.3.2. Class: geosrs:DynamicVerticalDatum
Table — geosrs:DynamicVerticalDatum
| URI | https://w3id.org/geosrs/datum/DynamicVerticalDatum |
| Definition | Vertical reference frame in which some of the defining parameters have time dependencyExample: Defining station heights have velocity to account for post-glacial isostatic rebound motion. Cf. ISO 19111:2019 Geographic information — Referencing by coordinates. |
| Super-classes | VerticalDatum |
| Example | geosrs:DynamicVerticalDatum |
9.3.3. Class: geosrs:ParametricDatum
Table — geosrs:ParametricDatum
| URI | https://w3id.org/geosrs/datum/ParametricDatum |
| Definition | Textual description and/or a set of parameters identifying a particular reference surface used as the origin of a parametric coordinate system, including its position with respect to the Earth. Cf. ISO 19111:2019 Geographic information — Referencing by coordinates. |
| Super-classes | Datum |
9.3.4. Class: geosrs:EngineeringDatum
Table — geosrs:EngineeringDatum
| URI | https://w3id.org/geosrs/datum/EngineeringDatum |
| Definition | Definition of the origin and orientation of an engineering coordinate reference systemNote: The origin can be fixed with respect to the Earth (such as a defined point at a construction site), or be a defined point on a moving vehicle (such as on a ship or satellite), or a defined point of an image. Cf. ISO 19111:2019 Geographic information — Referencing by coordinates. |
| Super-classes | Datum |
9.3.5. Class: geosrs:TemporalDatum
Table — geosrs:TemporalDatum
| URI | https://w3id.org/geosrs/datum/TemporalDatum |
| Definition | Definition of the relationship of a temporal coordinate system to an objectNote: The object is normally time on the Earth. Cf. ISO 19111:2019 Geographic information — Referencing by coordinates. |
| Super-classes | Datum |
9.3.6. Class: geosrs:DatumEnsemble
Table — geosrs:DatumEnsemble
| URI | https://w3id.org/geosrs/datum/DatumEnsemble |
| Definition | A collection of two or more datums (or if geodetic or vertical, a collection of two or more reference frames) that are realizations of one Conventional Reference System and which for all but the highest accuracy requirements may be considered to be insignificantly different from each other. Note: Within the datum ensemble every frame or datum is constrained to be a realization of the same reference system. Cf. ISO 19111:2019 Geographic information — Referencing by coordinates. |
9.4. Spheroid Properties
| Identifier | /req/datum/Spheroid_Properties |
|---|---|
| Statement | Implementations shall allow the RDFS properties geosrs:eccentricity, geosrs:inverseFlattening, geosrs:isSphere, geosrs:semiMajorAxis, geosrs:semiMinorAxis to be used in SPARQL graph patterns. |
9.4.1. Property: geosrs:eccentricity
Table — geosrs:eccentricity
| URI | https://w3id.org/geosrs/datum/eccentricity |
| Type | owl:DatatypeProperty |
| Definition | A measure of how much an ellipse deviates from a perfect circle. |
| Range | xsd:double |
| Domain | Ellipsoid |
| Example | geosrs:eccentricity |
9.4.2. Property: geosrs:inverseFlattening
Table — geosrs:inverseFlattening
| URI | https://w3id.org/geosrs/datum/inverseFlattening |
| Type | owl:DatatypeProperty |
| Definition | Indicates the inverse flattening value of an ellipsoid, expressed as a number or a ratio (percentage rate, parts per million, etc.). Cf. ISO 19111:2007:2007-07, table 37, attribute inverse flattening |
| Range | xsd:double |
| Domain | Ellipsoid |
| Example | geosrs:inverseFlattening |
9.4.3. Property: geosrs:isSphere
Table — geosrs:isSphere
| URI | https://w3id.org/geosrs/datum/isSphere |
| Type | owl:DatatypeProperty |
| Definition | Indicates whether the ellipsoid is a sphere. Cf. ISO 19111:2007:2007-07, table 37, attribute ellipsoid=sphere indicator. |
| Range | xsd:boolean |
| Domain | Ellipsoid |
| Example | geosrs:isSphere |
9.4.4. Property: geosrs:semiMajorAxis
Table — geosrs:semiMajorAxis
| URI | https://w3id.org/geosrs/datum/semiMajorAxis |
| Type | owl:DatatypeProperty |
| Definition | Indicates the length of the semi major axis of an ellipsoid. Cf. ISO 19111:2007:2007-07, table 36, attribute length of semi-major axis. |
| Range | xsd:double |
| Domain | Ellipsoid |
| Example | geosrs:semiMajorAxis |
9.4.5. Property: geosrs:semiMinorAxis
Table — geosrs:semiMinorAxis
| URI | https://w3id.org/geosrs/datum/semiMinorAxis |
| Type | owl:DatatypeProperty |
| Definition | Indicates the length of the semi minor axis of an ellipsoid. Cf. ISO 19111:2007:2007-07, table 37, attribute length of semi-minor axis. |
| Range | xsd:double |
| Domain | Ellipsoid |
| Example | geosrs:semiMinorAxis |
9.5. Spheroid Types
| Identifier | /req/datum/Spheroid_Types |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:Ellipsoid, geosrs:TriaxialEllipsoid to be used in SPARQL graph patterns. |
9.5.1. Class: geosrs:TriaxialEllipsoid
Table — geosrs:TriaxialEllipsoid
| URI | https://w3id.org/geosrs/datum/TriaxialEllipsoid |
| Definition | Surface of an analytic ellipsoid defined by three axes of different length. Also referred as scalene ellipsoid. |
10. SRS Application Module
This clause establishes the SRSAPP Requirements class, with IRI /req/srsapp, which has a corresponding Conformance Class, SRSAPP, with IRI /conf/srsapp.
Figure 5
Requirements class 5: 10-srsapplication_module.adoc Extension | |
|---|---|
| Identifier | /req/srsapplication |
| Target type | Implementation Specification |
| Conformance class | Conformance class A.5: /conf/srsapplication |
| requirement | /req/srsapplication/SRS_Application_Types /req/srsapplication/Map_Types |
10.1. Map Types
| Identifier | /req/srsapplication/Map_Types |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:CadastreMap, geosrs:NauticalChart, geosrs:ThematicMap, geosrs:TopographicMap, geosrs:WeatherMap to be used in SPARQL graph patterns. |
10.1.1. Class: geosrs:CadastreMap
Table — geosrs:CadastreMap
| URI | https://w3id.org/geosrs/application/CadastreMap |
| Definition | A map displaying a cadastre. |
| Super-classes | SRSApplication |
| Example | geosrs:CadastreMap |
10.1.2. Class: geosrs:NauticalChart
Table — geosrs:NauticalChart
| URI | https://w3id.org/geosrs/application/NauticalChart |
| Definition | A graphic representation of a sea area and adjacent coastal regions. |
| Super-classes | SRSApplication |
10.1.3. Class: geosrs:ThematicMap
Table — geosrs:ThematicMap
| URI | https://w3id.org/geosrs/application/ThematicMap |
| Definition | A map used to highlight a specific phenomenon. |
| Super-classes | SRSApplication |
10.1.4. Class: geosrs:TopographicMap
Table — geosrs:TopographicMap
| URI | https://w3id.org/geosrs/application/TopographicMap |
| Definition | A type of map characterized by large-scale detail and quantitative representation of relief. |
| Super-classes | SRSApplication |
| Example | geosrs:TopographicMap |
10.1.5. Class: geosrs:WeatherMap
Table — geosrs:WeatherMap
| URI | https://w3id.org/geosrs/application/WeatherMap |
| Definition | A map for showing the local direction in which weather systems are moving. |
| Super-classes | SRSApplication |
10.2. SRS Application Types
| Identifier | /req/srsapplication/SRS_Application_Types |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:SRSApplication, geosrs:SpatialReferencing, geosrs:EngineeringSurvey, geosrs:SatelliteSurvey, geosrs:SatelliteNavigation, geosrs:CoastalHydrography, geosrs:OffshoreEngineering, geosrs:Hydrography, geosrs:Drilling, geosrs:OilAndGasExploration to be used in SPARQL graph patterns. |
10.2.1. Class: geosrs:SRSApplication
Table — geosrs:SRSApplication
| URI | https://w3id.org/geosrs/application/SRSApplication |
| Definition | An application for which a spatial reference system is used. |
10.2.2. Class: geosrs:SpatialReferencing
Table — geosrs:SpatialReferencing
| URI | https://w3id.org/geosrs/application/SpatialReferencing |
| Definition | Spatial referencing is the process of assigning real-world coordinates to data so that it can be located on the Earth’s surface and used in a geographic information system (GIS). |
| Super-classes | SRSApplication |
10.2.3. Class: geosrs:EngineeringSurvey
Table — geosrs:EngineeringSurvey
| URI | https://w3id.org/geosrs/application/EngineeringSurvey |
| Definition | An engineering survey is the branch of surveying that provides the precise measurements and data needed to plan, build, and maintain engineering and infrastructure projects. |
| Super-classes | SRSApplication |
| Example | geosrs:EngineeringSurvey |
10.2.4. Class: geosrs:SatelliteSurvey
Table — geosrs:SatelliteSurvey
| URI | https://w3id.org/geosrs/application/SatelliteSurvey |
| Definition | A remote sensing survey conducted from Earth-orbiting satellites, collecting imagery and other data without direct ground contact. |
| Super-classes | SRSApplication |
10.2.5. Class: geosrs:SatelliteNavigation
Table — geosrs:SatelliteNavigation
| URI | https://w3id.org/geosrs/application/SatelliteNavigation |
| Definition | Satellite navigation is a system that uses satellites to provide autonomous geo-spatial positioning. It allows small electronic receivers to determine their location (longitude, latitude, and altitude) to high precision using time signals transmitted along a line of sight by radio from satellites. |
| Super-classes | SRSApplication |
10.2.6. Class: geosrs:CoastalHydrography
Table — geosrs:CoastalHydrography
| URI | https://w3id.org/geosrs/application/CoastalHydrography |
| Definition | Hydrographic surveying & monitoring focused on nearshore waters, where navigation safety and coastal change are most critical. |
| Super-classes | Hydrography |
| Example | geosrs:CoastalHydrography |
10.2.7. Class: geosrs:OffshoreEngineering
Table — geosrs:OffshoreEngineering
| URI | https://w3id.org/geosrs/application/OffshoreEngineering |
| Definition | Offshore engineering (also called ocean engineering or marine engineering in some contexts) is the branch of engineering concerned with the design, construction, installation, and maintenance of structures and systems in the ocean environment, such as oil and gas platforms, subsea pipelines, and renewable energy facilities. |
| Super-classes | SRSApplication |
| Example | geosrs:OffshoreEngineering |
10.2.8. Class: geosrs:Hydrography
Table — geosrs:Hydrography
| URI | https://w3id.org/geosrs/application/Hydrography |
| Definition | Hydrography is the branch of applied sciences which deals with the measurement and description of the physical features of oceans, seas, coastal areas, lakes, and rivers, as well as the prediction of their change over time, for the primary purpose of safety of navigation and in support of all other marine activities, including economic development, security and defense, scientific research, and environmental protection. |
| Super-classes | SRSApplication |
| Example | geosrs:Hydrography |
10.2.9. Class: geosrs:Drilling
Table — geosrs:Drilling
| URI | https://w3id.org/geosrs/application/Drilling |
| Definition | Drilling is the process of creating holes in the ground (or other solid materials) using specialized tools, widely applied in energy, construction, mining, and manufacturing. |
| Super-classes | SRSApplication |
| Example | geosrs:Drilling |
10.2.10. Class: geosrs:OilAndGasExploration
Table — geosrs:OilAndGasExploration
| URI | https://w3id.org/geosrs/application/OilAndGasExploration |
| Definition | Oil and natural gas exploration is the search for underground or underwater reservoirs containing hydrocarbons, using geological and geophysical methods, followed by drilling to confirm and produce them. |
| Super-classes | SRSApplication |
11. Projections Module
This clause establishes the PROJ Requirements class, with IRI /req/proj, which has a corresponding Conformance Class, PROJ, with IRI /conf/proj.
Figure 6
| Identifier | /req/projections |
|---|---|
| Target type | Implementation Specification |
| Conformance class | Conformance class A.6: /conf/projections |
| requirement | /req/projections/Lenticular_Projections /req/projections/Conformal_Projections /req/projections/Minimum_Error_Projections /req/projections/Pseudo_Azimuthal_Projections /req/projections/Equal_Area_Projections /req/projections/Pseudo_Conical_Projections /req/projections/Globular_Projections /req/projections/Pseudo_Cylindrical_Projections /req/projections/Archaic_Projections /req/projections/Cylindrical_Projections /req/projections/Compromise_Projections /req/projections/Polyhedral_Projections /req/projections/Equidistant_Projections /req/projections/Azimuthal_Projections /req/projections/Conical_Projections /req/projections/Perspective_Projections /req/projections/Stereographic_Projections /req/projections/Polyconic_Projections /req/projections/Projection |
11.1. Archaic Projections
| Identifier | /req/projections/Archaic_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:ArchaicProjection, geosrs:PtolemyIProjection to be used in SPARQL graph patterns. |
11.1.1. Class: geosrs:ArchaicProjection
Table — geosrs:ArchaicProjection
| URI | https://w3id.org/geosrs/projection/ArchaicProjection |
11.1.2. Class: geosrs:PtolemyIProjection
Table — geosrs:PtolemyIProjection
| URI | https://w3id.org/geosrs/projection/PtolemyIProjection |
| Super-classes | ArchaicProjection |
11.2. Azimuthal Projections
| Identifier | /req/projections/Azimuthal_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:AzimuthalProjection, geosrs:BreusingGeometricProjection, geosrs:BreusingHarmonicProjection, geosrs:GinzburgIIProjection, geosrs:GinzburgIProjection, geosrs:GnomonicProjection, geosrs:JamesAzimuthalProjection to be used in SPARQL graph patterns. |
11.2.1. Class: geosrs:AzimuthalProjection
Table — geosrs:AzimuthalProjection
| URI | https://w3id.org/geosrs/projection/AzimuthalProjection |
11.2.2. Class: geosrs:BreusingGeometricProjection
Table — geosrs:BreusingGeometricProjection
| URI | https://w3id.org/geosrs/projection/BreusingGeometricProjection |
| Super-classes | AzimuthalProjection |
11.2.3. Class: geosrs:BreusingHarmonicProjection
Table — geosrs:BreusingHarmonicProjection
| URI | https://w3id.org/geosrs/projection/BreusingHarmonicProjection |
| Super-classes | AzimuthalProjection |
11.2.4. Class: geosrs:GinzburgIIProjection
Table — geosrs:GinzburgIIProjection
| URI | https://w3id.org/geosrs/projection/GinzburgIIProjection |
| Super-classes | AzimuthalProjection |
11.2.5. Class: geosrs:GinzburgIProjection
Table — geosrs:GinzburgIProjection
| URI | https://w3id.org/geosrs/projection/GinzburgIProjection |
| Super-classes | AzimuthalProjection |
11.2.6. Class: geosrs:GnomonicProjection
Table — geosrs:GnomonicProjection
| URI | https://w3id.org/geosrs/projection/GnomonicProjection |
| Super-classes | AzimuthalProjection |
11.2.7. Class: geosrs:JamesAzimuthalProjection
Table — geosrs:JamesAzimuthalProjection
| URI | https://w3id.org/geosrs/projection/JamesAzimuthalProjection |
| Super-classes | AzimuthalProjection |
11.3. Compromise Projections
| Identifier | /req/projections/Compromise_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:ArmadilloProjection, geosrs:BakerDinomicProjection, geosrs:BertinProjection, geosrs:ChamberlinTrimetricProjection, geosrs:DenoyerSemiEllipticalProjection, geosrs:FairgrieveProjection, geosrs:LarriveeProjection, geosrs:PetermannStarProjection, geosrs:SpilhausOceanicProjection, geosrs:VanDerGrintenIIIProjection, geosrs:WinkelIIProjection, geosrs:WinkelIProjection, geosrs:WinkelSnyderProjection to be used in SPARQL graph patterns. |
11.3.1. Class: geosrs:ArmadilloProjection
Table — geosrs:ArmadilloProjection
| URI | https://w3id.org/geosrs/projection/ArmadilloProjection |
| Super-classes | CompromiseProjection |
11.3.2. Class: geosrs:BakerDinomicProjection
Table — geosrs:BakerDinomicProjection
| URI | https://w3id.org/geosrs/projection/BakerDinomicProjection |
| Super-classes | CompromiseProjection |
11.3.3. Class: geosrs:BertinProjection
Table — geosrs:BertinProjection
| URI | https://w3id.org/geosrs/projection/BertinProjection |
| Super-classes | CompromiseProjection |
11.3.4. Class: geosrs:ChamberlinTrimetricProjection
Table — geosrs:ChamberlinTrimetricProjection
| URI | https://w3id.org/geosrs/projection/ChamberlinTrimetricProjection |
| Super-classes | CompromiseProjection |
11.3.5. Class: geosrs:DenoyerSemiEllipticalProjection
Table — geosrs:DenoyerSemiEllipticalProjection
| URI | https://w3id.org/geosrs/projection/DenoyerSemiEllipticalProjection |
| Super-classes | CompromiseProjection |
11.3.6. Class: geosrs:FairgrieveProjection
Table — geosrs:FairgrieveProjection
| URI | https://w3id.org/geosrs/projection/FairgrieveProjection |
| Super-classes | CompromiseProjection |
11.3.7. Class: geosrs:LarriveeProjection
Table — geosrs:LarriveeProjection
| URI | https://w3id.org/geosrs/projection/LarriveeProjection |
| Super-classes | CompromiseProjection |
11.3.8. Class: geosrs:PetermannStarProjection
Table — geosrs:PetermannStarProjection
| URI | https://w3id.org/geosrs/projection/PetermannStarProjection |
| Super-classes | CompromiseProjection |
11.3.9. Class: geosrs:SpilhausOceanicProjection
Table — geosrs:SpilhausOceanicProjection
| URI | https://w3id.org/geosrs/projection/SpilhausOceanicProjection |
| Super-classes | CompromiseProjection |
11.3.10. Class: geosrs:VanDerGrintenIIIProjection
Table — geosrs:VanDerGrintenIIIProjection
| URI | https://w3id.org/geosrs/projection/VanDerGrintenIIIProjection |
| Super-classes | CompromiseProjection |
11.3.11. Class: geosrs:WinkelIIProjection
Table — geosrs:WinkelIIProjection
| URI | https://w3id.org/geosrs/projection/WinkelIIProjection |
| Super-classes | CompromiseProjection |
11.3.12. Class: geosrs:WinkelIProjection
Table — geosrs:WinkelIProjection
| URI | https://w3id.org/geosrs/projection/WinkelIProjection |
| Super-classes | CompromiseProjection |
11.3.13. Class: geosrs:WinkelSnyderProjection
Table — geosrs:WinkelSnyderProjection
| URI | https://w3id.org/geosrs/projection/WinkelSnyderProjection |
| Super-classes | CompromiseProjection |
11.4. Conformal Projections
| Identifier | /req/projections/Conformal_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:AdamsProjection, geosrs:AdamsWorldInASquareIIProjection, geosrs:AdamsWorldInASquareIProjection, geosrs:AugustEpicycloidalProjection, geosrs:CoxConformalProjection, geosrs:EisenlohrProjection, geosrs:GS50Projection, geosrs:PeirceQuincuncialProjection, geosrs:StereographicProjection to be used in SPARQL graph patterns. |
11.4.1. Class: geosrs:AdamsProjection
Table — geosrs:AdamsProjection
| URI | https://w3id.org/geosrs/projection/AdamsProjection |
| Super-classes | ConformalProjection |
11.4.2. Class: geosrs:AdamsWorldInASquareIIProjection
Table — geosrs:AdamsWorldInASquareIIProjection
| URI | https://w3id.org/geosrs/projection/AdamsWorldInASquareIIProjection |
| Super-classes | ConformalProjection |
11.4.3. Class: geosrs:AdamsWorldInASquareIProjection
Table — geosrs:AdamsWorldInASquareIProjection
| URI | https://w3id.org/geosrs/projection/AdamsWorldInASquareIProjection |
| Super-classes | ConformalProjection |
11.4.4. Class: geosrs:AugustEpicycloidalProjection
Table — geosrs:AugustEpicycloidalProjection
| URI | https://w3id.org/geosrs/projection/AugustEpicycloidalProjection |
| Definition | A projection in which every angle between two curves that crosss each other on a celestical body is preserved in the image of the projection |
| Super-classes | ConformalProjection |
11.4.5. Class: geosrs:CoxConformalProjection
Table — geosrs:CoxConformalProjection
| URI | https://w3id.org/geosrs/projection/CoxConformalProjection |
| Super-classes | ConformalProjection |
11.4.6. Class: geosrs:EisenlohrProjection
Table — geosrs:EisenlohrProjection
| URI | https://w3id.org/geosrs/projection/EisenlohrProjection |
| Super-classes | ConformalProjection |
11.4.7. Class: geosrs:GS50Projection
Table — geosrs:GS50Projection
| URI | https://w3id.org/geosrs/projection/GS50Projection |
| Super-classes | ConformalProjection |
11.4.8. Class: geosrs:PeirceQuincuncialProjection
Table — geosrs:PeirceQuincuncialProjection
| URI | https://w3id.org/geosrs/projection/PeirceQuincuncialProjection |
| Super-classes | ConformalProjection |
11.4.9. Class: geosrs:StereographicProjection
Table — geosrs:StereographicProjection
| URI | https://w3id.org/geosrs/projection/StereographicProjection |
| Super-classes | ConformalProjection |
| Example | geosrs:StereographicProjection |
11.5. Conical Projections
| Identifier | /req/projections/Conical_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:BipolarObliqueConicConformalProjection, geosrs:CentralConicProjection, geosrs:HerschelConformalConicProjection, geosrs:Krovak, geosrs:LambertConformalConicProjection, geosrs:MurdochIIIProjection, geosrs:MurdochIIProjection, geosrs:MurdochIProjection, geosrs:SchjerningIProjection, geosrs:VitkovskyIProjection to be used in SPARQL graph patterns. |
11.5.1. Class: geosrs:BipolarObliqueConicConformalProjection
Table — geosrs:BipolarObliqueConicConformalProjection
| URI | https://w3id.org/geosrs/projection/BipolarObliqueConicConformalProjection |
| Super-classes | ConicalProjection |
11.5.2. Class: geosrs:CentralConicProjection
Table — geosrs:CentralConicProjection
| URI | https://w3id.org/geosrs/projection/CentralConicProjection |
| Super-classes | ConicalProjection |
11.5.3. Class: geosrs:HerschelConformalConicProjection
Table — geosrs:HerschelConformalConicProjection
| URI | https://w3id.org/geosrs/projection/HerschelConformalConicProjection |
| Super-classes | ConicalProjection |
11.5.4. Class: geosrs:Krovak
Table — geosrs:Krovak
| URI | https://w3id.org/geosrs/projection/Krovak |
| Super-classes | ConicalProjection |
| Example | geosrs:Krovak |
11.5.5. Class: geosrs:LambertConformalConicProjection
Table — geosrs:LambertConformalConicProjection
| URI | https://w3id.org/geosrs/projection/LambertConformalConicProjection |
| Super-classes | ConicalProjection |
11.5.6. Class: geosrs:MurdochIIIProjection
Table — geosrs:MurdochIIIProjection
| URI | https://w3id.org/geosrs/projection/MurdochIIIProjection |
| Super-classes | ConicalProjection |
11.5.7. Class: geosrs:MurdochIIProjection
Table — geosrs:MurdochIIProjection
| URI | https://w3id.org/geosrs/projection/MurdochIIProjection |
| Super-classes | ConicalProjection |
11.5.8. Class: geosrs:MurdochIProjection
Table — geosrs:MurdochIProjection
| URI | https://w3id.org/geosrs/projection/MurdochIProjection |
| Super-classes | ConicalProjection |
11.5.9. Class: geosrs:SchjerningIProjection
Table — geosrs:SchjerningIProjection
| URI | https://w3id.org/geosrs/projection/SchjerningIProjection |
| Super-classes | ConicalProjection |
11.5.10. Class: geosrs:VitkovskyIProjection
Table — geosrs:VitkovskyIProjection
| URI | https://w3id.org/geosrs/projection/VitkovskyIProjection |
| Super-classes | ConicalProjection |
11.6. Cylindrical Projections
| Identifier | /req/projections/Cylindrical_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:ArdenCloseProjection, geosrs:BSAMCylindricalProjection, geosrs:BalthasartProjection, geosrs:BehrmannProjection, geosrs:BraunPerspectiveProjection, geosrs:BraunStereographicProjection, geosrs:CompactMillerProjection, geosrs:CylindricalProjection, geosrs:CylindricalStereographicProjection, geosrs:KarchenkoShabanovaProjection, geosrs:LabordeProjection, geosrs:MercatorProjection, geosrs:MillerProjection, geosrs:PattersonCylindricalProjection, geosrs:PavlovProjection, geosrs:ToblerCylindricalIIProjection, geosrs:ToblerCylindricalIProjection, geosrs:TransverseMercatorProjection, geosrs:UrmayevIIIProjection, geosrs:WebMercatorProjection to be used in SPARQL graph patterns. |
11.6.1. Class: geosrs:ArdenCloseProjection
Table — geosrs:ArdenCloseProjection
| URI | https://w3id.org/geosrs/projection/ArdenCloseProjection |
| Super-classes | CylindricalProjection |
11.6.2. Class: geosrs:BSAMCylindricalProjection
Table — geosrs:BSAMCylindricalProjection
| URI | https://w3id.org/geosrs/projection/BSAMCylindricalProjection |
| Super-classes | CylindricalStereographicProjection |
11.6.3. Class: geosrs:BalthasartProjection
Table — geosrs:BalthasartProjection
| URI | https://w3id.org/geosrs/projection/BalthasartProjection |
| Definition | A cylindrical equal-area projection that uses a standard parallel of phi_s=50 degrees |
| Super-classes | CylindricalEqualArea |
11.6.4. Class: geosrs:BehrmannProjection
Table — geosrs:BehrmannProjection
| URI | https://w3id.org/geosrs/projection/BehrmannProjection |
| Definition | A cylindrical equal-area map projection with standard parallels set at 30° north and south |
| Super-classes | CylindricalEqualArea |
11.6.5. Class: geosrs:BraunPerspectiveProjection
Table — geosrs:BraunPerspectiveProjection
| URI | https://w3id.org/geosrs/projection/BraunPerspectiveProjection |
| Super-classes | CylindricalProjection |
11.6.6. Class: geosrs:BraunStereographicProjection
Table — geosrs:BraunStereographicProjection
| URI | https://w3id.org/geosrs/projection/BraunStereographicProjection |
| Super-classes | CylindricalStereographicProjection |
11.6.7. Class: geosrs:CompactMillerProjection
Table — geosrs:CompactMillerProjection
| URI | https://w3id.org/geosrs/projection/CompactMillerProjection |
| Super-classes | CylindricalProjection |
11.6.8. Class: geosrs:CylindricalProjection
Table — geosrs:CylindricalProjection
| URI | https://w3id.org/geosrs/projection/CylindricalProjection |
11.6.9. Class: geosrs:CylindricalStereographicProjection
Table — geosrs:CylindricalStereographicProjection
| URI | https://w3id.org/geosrs/projection/CylindricalStereographicProjection |
| Super-classes | CylindricalProjection |
11.6.10. Class: geosrs:KarchenkoShabanovaProjection
Table — geosrs:KarchenkoShabanovaProjection
| URI | https://w3id.org/geosrs/projection/KarchenkoShabanovaProjection |
| Super-classes | CylindricalProjection |
11.6.11. Class: geosrs:LabordeProjection
Table — geosrs:LabordeProjection
| URI | https://w3id.org/geosrs/projection/LabordeProjection |
| Super-classes | CylindricalProjection |
| Example | geosrs:LabordeProjection |
11.6.12. Class: geosrs:MercatorProjection
Table — geosrs:MercatorProjection
| URI | https://w3id.org/geosrs/projection/MercatorProjection |
| Super-classes | CylindricalProjection |
| Example | geosrs:MercatorProjection |
11.6.13. Class: geosrs:MillerProjection
Table — geosrs:MillerProjection
| URI | https://w3id.org/geosrs/projection/MillerProjection |
| Super-classes | CylindricalProjection |
11.6.14. Class: geosrs:PattersonCylindricalProjection
Table — geosrs:PattersonCylindricalProjection
| URI | https://w3id.org/geosrs/projection/PattersonCylindricalProjection |
| Super-classes | CylindricalProjection |
11.6.15. Class: geosrs:PavlovProjection
Table — geosrs:PavlovProjection
| URI | https://w3id.org/geosrs/projection/PavlovProjection |
| Super-classes | CylindricalProjection |
11.6.16. Class: geosrs:ToblerCylindricalIIProjection
Table — geosrs:ToblerCylindricalIIProjection
| URI | https://w3id.org/geosrs/projection/ToblerCylindricalIIProjection |
| Super-classes | CylindricalProjection |
11.6.17. Class: geosrs:ToblerCylindricalIProjection
Table — geosrs:ToblerCylindricalIProjection
| URI | https://w3id.org/geosrs/projection/ToblerCylindricalIProjection |
| Super-classes | CylindricalProjection |
11.6.18. Class: geosrs:TransverseMercatorProjection
Table — geosrs:TransverseMercatorProjection
| URI | https://w3id.org/geosrs/projection/TransverseMercatorProjection |
| Super-classes | MercatorProjection |
11.6.19. Class: geosrs:UrmayevIIIProjection
Table — geosrs:UrmayevIIIProjection
| URI | https://w3id.org/geosrs/projection/UrmayevIIIProjection |
| Super-classes | CylindricalProjection |
11.6.20. Class: geosrs:WebMercatorProjection
Table — geosrs:WebMercatorProjection
| URI | https://w3id.org/geosrs/projection/WebMercatorProjection |
| Super-classes | CylindricalProjection |
11.7. Equal Area Projections
| Identifier | /req/projections/Equal_Area_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:AlbersEqualAreaProjection, geosrs:AzimuthalEqualAreaProjection, geosrs:CylindricalEqualArea, geosrs:EqualAreaProjection, geosrs:GallPetersProjection, geosrs:HoboDyerProjection, geosrs:LambertAzimuthalEqualArea, geosrs:LambertCylindricalEqualAreaProjection, geosrs:ObliqueCylindricalEqualAreaProjection, geosrs:SlideAndDiceParallelSmallCircle, geosrs:SliceAndDiceVertexGreatCircle, geosrs:SmythEqualSurfaceProjection, geosrs:SnyderEqualArea, geosrs:ToblerWorldInASquareProjection, geosrs:TransverseCylindricalEqualAreaProjection, geosrs:TrystanEdwardsProjection, geosrs:WiechelProjection to be used in SPARQL graph patterns. |
11.7.1. Class: geosrs:AlbersEqualAreaProjection
Table — geosrs:AlbersEqualAreaProjection
| URI | https://w3id.org/geosrs/projection/AlbersEqualAreaProjection |
| Super-classes | EqualAreaProjection |
| Example | geosrs:AlbersEqualAreaProjection |
11.7.2. Class: geosrs:AzimuthalEqualAreaProjection
Table — geosrs:AzimuthalEqualAreaProjection
| URI | https://w3id.org/geosrs/projection/AzimuthalEqualAreaProjection |
| Super-classes | EqualAreaProjection |
11.7.3. Class: geosrs:CylindricalEqualArea
Table — geosrs:CylindricalEqualArea
| URI | https://w3id.org/geosrs/projection/CylindricalEqualArea |
| Super-classes | EqualAreaProjection |
| Example | geosrs:CylindricalEqualArea |
11.7.4. Class: geosrs:EqualAreaProjection
Table — geosrs:EqualAreaProjection
| URI | https://w3id.org/geosrs/projection/EqualAreaProjection |
11.7.5. Class: geosrs:GallPetersProjection
Table — geosrs:GallPetersProjection
| URI | https://w3id.org/geosrs/projection/GallPetersProjection |
| Super-classes | EqualAreaProjection |
11.7.6. Class: geosrs:HoboDyerProjection
Table — geosrs:HoboDyerProjection
| URI | https://w3id.org/geosrs/projection/HoboDyerProjection |
| Super-classes | EqualAreaProjection |
11.7.7. Class: geosrs:LambertAzimuthalEqualArea
Table — geosrs:LambertAzimuthalEqualArea
| URI | https://w3id.org/geosrs/projection/LambertAzimuthalEqualArea |
| Super-classes | EqualAreaProjection |
11.7.8. Class: geosrs:LambertCylindricalEqualAreaProjection
Table — geosrs:LambertCylindricalEqualAreaProjection
| URI | https://w3id.org/geosrs/projection/LambertCylindricalEqualAreaProjection |
| Super-classes | CylindricalEqualArea |
11.7.9. Class: geosrs:ObliqueCylindricalEqualAreaProjection
Table — geosrs:ObliqueCylindricalEqualAreaProjection
| URI | https://w3id.org/geosrs/projection/ObliqueCylindricalEqualAreaProjection |
| Super-classes | CylindricalEqualArea |
11.7.10. Class: geosrs:SlideAndDiceParallelSmallCircle
Table — geosrs:SlideAndDiceParallelSmallCircle
| URI | https://w3id.org/geosrs/projection/SlideAndDiceParallelSmallCircle |
| Definition | The Parallel Small Circle version of the equa-area projection method defined for polyhedral globes by van Leeuwen and Strebe. van Leeuwen, D., & Strebe, D. (2006). A “Slice-and-Dice” Approach to Area Equivalence in Polyhedral Map Projections. Cartography and Geographic Information Science, 33(4), 269–286. |
| Super-classes | EqualAreaProjection |
11.7.11. Class: geosrs:SliceAndDiceVertexGreatCircle
Table — geosrs:SliceAndDiceVertexGreatCircle
| URI | https://w3id.org/geosrs/projection/SliceAndDiceVertexGreatCircle |
| Definition | The Vertex-oriented Great Circle version of the equa-area projection method defined for polyhedral globes by van Leeuwen and Strebe. van Leeuwen, D., & Strebe, D. (2006). A “Slice-and-Dice” Approach to Area Equivalence in Polyhedral Map Projections. Cartography and Geographic Information Science, 33(4), 269–286. |
| Super-classes | EqualAreaProjection |
11.7.12. Class: geosrs:SmythEqualSurfaceProjection
Table — geosrs:SmythEqualSurfaceProjection
| URI | https://w3id.org/geosrs/projection/SmythEqualSurfaceProjection |
| Super-classes | CylindricalEqualArea |
11.7.13. Class: geosrs:SnyderEqualArea
Table — geosrs:SnyderEqualArea
| URI | https://w3id.org/geosrs/projection/SnyderEqualArea |
| Definition | Equal area projection for polyhedral globes, used frequently in Discrete Global Grid Systems. Snyder, J.P. (1992). “An Equal-Area Map Projection for Polyhedral Globes”. Cartographica. 29 (1): 10–21 |
| Super-classes | EqualAreaProjection |
11.7.14. Class: geosrs:ToblerWorldInASquareProjection
Table — geosrs:ToblerWorldInASquareProjection
| URI | https://w3id.org/geosrs/projection/ToblerWorldInASquareProjection |
| Super-classes | CylindricalEqualArea |
11.7.15. Class: geosrs:TransverseCylindricalEqualAreaProjection
Table — geosrs:TransverseCylindricalEqualAreaProjection
| URI | https://w3id.org/geosrs/projection/TransverseCylindricalEqualAreaProjection |
| Super-classes | CylindricalEqualArea |
11.7.16. Class: geosrs:TrystanEdwardsProjection
Table — geosrs:TrystanEdwardsProjection
| URI | https://w3id.org/geosrs/projection/TrystanEdwardsProjection |
| Super-classes | EqualAreaProjection |
11.7.17. Class: geosrs:WiechelProjection
Table — geosrs:WiechelProjection
| URI | https://w3id.org/geosrs/projection/WiechelProjection |
| Super-classes | EqualAreaProjection |
11.8. Equidistant Projections
| Identifier | /req/projections/Equidistant_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:AzimuthalEquidistantProjection, geosrs:BerghausStarProjection, geosrs:CassiniProjection, geosrs:EquidistantConicProjection, geosrs:EquidistantCylindricalProjection, geosrs:EquidistantProjection, geosrs:EquirectangularProjection, geosrs:ObliquePlateCarreeProjection, geosrs:PlateCarreeProjection, geosrs:TwoPointEquidistantProjection to be used in SPARQL graph patterns. |
11.8.1. Class: geosrs:AzimuthalEquidistantProjection
Table — geosrs:AzimuthalEquidistantProjection
| URI | https://w3id.org/geosrs/projection/AzimuthalEquidistantProjection |
| Super-classes | EquidistantProjection |
| Example | geosrs:AzimuthalEquidistantProjection |
11.8.2. Class: geosrs:BerghausStarProjection
Table — geosrs:BerghausStarProjection
| URI | https://w3id.org/geosrs/projection/BerghausStarProjection |
| Super-classes | EquidistantProjection |
11.8.3. Class: geosrs:CassiniProjection
Table — geosrs:CassiniProjection
| URI | https://w3id.org/geosrs/projection/CassiniProjection |
| Definition | A map projection first described in an approximate form by César-François Cassini de Thury in 1745 |
| Super-classes | EquidistantProjection |
| Example | geosrs:CassiniProjection |
11.8.4. Class: geosrs:EquidistantConicProjection
Table — geosrs:EquidistantConicProjection
| URI | https://w3id.org/geosrs/projection/EquidistantConicProjection |
| Super-classes | EquidistantProjection |
11.8.5. Class: geosrs:EquidistantCylindricalProjection
Table — geosrs:EquidistantCylindricalProjection
| URI | https://w3id.org/geosrs/projection/EquidistantCylindricalProjection |
| Super-classes | EquidistantProjection |
| Example | geosrs:EquidistantCylindricalProjection |
11.8.6. Class: geosrs:EquidistantProjection
Table — geosrs:EquidistantProjection
| URI | https://w3id.org/geosrs/projection/EquidistantProjection |
11.8.7. Class: geosrs:EquirectangularProjection
Table — geosrs:EquirectangularProjection
| URI | https://w3id.org/geosrs/projection/EquirectangularProjection |
| Super-classes | EquidistantProjection |
11.8.8. Class: geosrs:ObliquePlateCarreeProjection
Table — geosrs:ObliquePlateCarreeProjection
| URI | https://w3id.org/geosrs/projection/ObliquePlateCarreeProjection |
| Super-classes | EquidistantProjection |
11.8.9. Class: geosrs:PlateCarreeProjection
Table — geosrs:PlateCarreeProjection
| URI | https://w3id.org/geosrs/projection/PlateCarreeProjection |
| Super-classes | EquidistantProjection |
11.8.10. Class: geosrs:TwoPointEquidistantProjection
Table — geosrs:TwoPointEquidistantProjection
| URI | https://w3id.org/geosrs/projection/TwoPointEquidistantProjection |
| Super-classes | EquidistantProjection |
11.9. Globular Projections
| Identifier | /req/projections/Globular_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:ApianGlobularIProjection, geosrs:BaconGlobularProjection, geosrs:FournierGlobularIProjection to be used in SPARQL graph patterns. |
11.9.1. Class: geosrs:ApianGlobularIProjection
Table — geosrs:ApianGlobularIProjection
| URI | https://w3id.org/geosrs/projection/ApianGlobularIProjection |
| Super-classes | GlobularProjection |
11.9.2. Class: geosrs:BaconGlobularProjection
Table — geosrs:BaconGlobularProjection
| URI | https://w3id.org/geosrs/projection/BaconGlobularProjection |
| Super-classes | GlobularProjection |
11.9.3. Class: geosrs:FournierGlobularIProjection
Table — geosrs:FournierGlobularIProjection
| URI | https://w3id.org/geosrs/projection/FournierGlobularIProjection |
| Super-classes | GlobularProjection |
11.10. Lenticular Projections
| Identifier | /req/projections/Lenticular_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:A4Projection, geosrs:BriesemeisterProjection, geosrs:CiricIProjection, geosrs:CupolaProjection, geosrs:DedistortProjection, geosrs:DietrichKitadaProjection, geosrs:FranculaIIIProjection, geosrs:FranculaIVProjection, geosrs:FranculaIXProjection, geosrs:FranculaVIIIProjection, geosrs:FranculaVProjection, geosrs:FranculaXIIIProjection, geosrs:FranculaXIIProjection, geosrs:FranculaXIVProjection, geosrs:HamusoidalProjection, geosrs:KissProjection to be used in SPARQL graph patterns. |
11.10.1. Class: geosrs:A4Projection
Table — geosrs:A4Projection
| URI | https://w3id.org/geosrs/projection/A4Projection |
| Super-classes | LenticularProjection |
11.10.2. Class: geosrs:BriesemeisterProjection
Table — geosrs:BriesemeisterProjection
| URI | https://w3id.org/geosrs/projection/BriesemeisterProjection |
| Super-classes | LenticularProjection |
11.10.3. Class: geosrs:CiricIProjection
Table — geosrs:CiricIProjection
| URI | https://w3id.org/geosrs/projection/CiricIProjection |
| Super-classes | LenticularProjection |
11.10.4. Class: geosrs:CupolaProjection
Table — geosrs:CupolaProjection
| URI | https://w3id.org/geosrs/projection/CupolaProjection |
| Super-classes | LenticularProjection |
11.10.5. Class: geosrs:DedistortProjection
Table — geosrs:DedistortProjection
| URI | https://w3id.org/geosrs/projection/DedistortProjection |
| Super-classes | LenticularProjection |
11.10.6. Class: geosrs:DietrichKitadaProjection
Table — geosrs:DietrichKitadaProjection
| URI | https://w3id.org/geosrs/projection/DietrichKitadaProjection |
| Super-classes | LenticularProjection |
11.10.7. Class: geosrs:FranculaIIIProjection
Table — geosrs:FranculaIIIProjection
| URI | https://w3id.org/geosrs/projection/FranculaIIIProjection |
| Super-classes | LenticularProjection |
11.10.8. Class: geosrs:FranculaIVProjection
Table — geosrs:FranculaIVProjection
| URI | https://w3id.org/geosrs/projection/FranculaIVProjection |
| Super-classes | LenticularProjection |
11.10.9. Class: geosrs:FranculaIXProjection
Table — geosrs:FranculaIXProjection
| URI | https://w3id.org/geosrs/projection/FranculaIXProjection |
| Super-classes | LenticularProjection |
11.10.10. Class: geosrs:FranculaVIIIProjection
Table — geosrs:FranculaVIIIProjection
| URI | https://w3id.org/geosrs/projection/FranculaVIIIProjection |
| Super-classes | LenticularProjection |
11.10.11. Class: geosrs:FranculaVProjection
Table — geosrs:FranculaVProjection
| URI | https://w3id.org/geosrs/projection/FranculaVProjection |
| Super-classes | LenticularProjection |
11.10.12. Class: geosrs:FranculaXIIIProjection
Table — geosrs:FranculaXIIIProjection
| URI | https://w3id.org/geosrs/projection/FranculaXIIIProjection |
| Super-classes | LenticularProjection |
11.10.13. Class: geosrs:FranculaXIIProjection
Table — geosrs:FranculaXIIProjection
| URI | https://w3id.org/geosrs/projection/FranculaXIIProjection |
| Super-classes | LenticularProjection |
11.10.14. Class: geosrs:FranculaXIVProjection
Table — geosrs:FranculaXIVProjection
| URI | https://w3id.org/geosrs/projection/FranculaXIVProjection |
| Super-classes | LenticularProjection |
11.10.15. Class: geosrs:HamusoidalProjection
Table — geosrs:HamusoidalProjection
| URI | https://w3id.org/geosrs/projection/HamusoidalProjection |
| Super-classes | LenticularProjection |
11.10.16. Class: geosrs:KissProjection
Table — geosrs:KissProjection
| URI | https://w3id.org/geosrs/projection/KissProjection |
| Super-classes | LenticularProjection |
11.11. Minimum Error Projections
| Identifier | /req/projections/Minimum_Error_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:AiryProjection to be used in SPARQL graph patterns. |
11.11.1. Class: geosrs:AiryProjection
Table — geosrs:AiryProjection
| URI | https://w3id.org/geosrs/projection/AiryProjection |
| Definition | An azimuthal minimum error projection for the region within the small or great circle defined by an angular distance, from the tangency point of the plane |
| Super-classes | MinimumErrorProjection |
| Example | geosrs:AiryProjection |
11.12. Perspective Projections
| Identifier | /req/projections/Perspective_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:CentralCylindricalProjection, geosrs:GeneralVerticalPerspectiveProjection, geosrs:GilbertTwoWorldPerspectiveProjection, geosrs:LaHireProjection, geosrs:LorgnaProjection, geosrs:LowryProjection, geosrs:OrthographicProjection, geosrs:PerspectiveConicProjection, geosrs:PerspectiveProjection, geosrs:TiltedPerspectiveProjection, geosrs:VerticalPerspectiveProjection to be used in SPARQL graph patterns. |
11.12.1. Class: geosrs:CentralCylindricalProjection
Table — geosrs:CentralCylindricalProjection
| URI | https://w3id.org/geosrs/projection/CentralCylindricalProjection |
| Super-classes | PerspectiveProjection |
| Example | geosrs:CentralCylindricalProjection |
11.12.2. Class: geosrs:GeneralVerticalPerspectiveProjection
Table — geosrs:GeneralVerticalPerspectiveProjection
| URI | https://w3id.org/geosrs/projection/GeneralVerticalPerspectiveProjection |
| Super-classes | PerspectiveProjection |
11.12.3. Class: geosrs:GilbertTwoWorldPerspectiveProjection
Table — geosrs:GilbertTwoWorldPerspectiveProjection
| URI | https://w3id.org/geosrs/projection/GilbertTwoWorldPerspectiveProjection |
| Super-classes | PerspectiveProjection |
11.12.4. Class: geosrs:LaHireProjection
Table — geosrs:LaHireProjection
| URI | https://w3id.org/geosrs/projection/LaHireProjection |
| Super-classes | PerspectiveProjection |
11.12.5. Class: geosrs:LorgnaProjection
Table — geosrs:LorgnaProjection
| URI | https://w3id.org/geosrs/projection/LorgnaProjection |
| Super-classes | PerspectiveProjection |
11.12.6. Class: geosrs:LowryProjection
Table — geosrs:LowryProjection
| URI | https://w3id.org/geosrs/projection/LowryProjection |
| Super-classes | PerspectiveProjection |
11.12.7. Class: geosrs:OrthographicProjection
Table — geosrs:OrthographicProjection
| URI | https://w3id.org/geosrs/projection/OrthographicProjection |
| Super-classes | PerspectiveProjection |
11.12.8. Class: geosrs:PerspectiveConicProjection
Table — geosrs:PerspectiveConicProjection
| URI | https://w3id.org/geosrs/projection/PerspectiveConicProjection |
| Super-classes | PerspectiveProjection |
11.12.9. Class: geosrs:PerspectiveProjection
Table — geosrs:PerspectiveProjection
| URI | https://w3id.org/geosrs/projection/PerspectiveProjection |
11.12.10. Class: geosrs:TiltedPerspectiveProjection
Table — geosrs:TiltedPerspectiveProjection
| URI | https://w3id.org/geosrs/projection/TiltedPerspectiveProjection |
| Super-classes | PerspectiveProjection |
11.12.11. Class: geosrs:VerticalPerspectiveProjection
Table — geosrs:VerticalPerspectiveProjection
| URI | https://w3id.org/geosrs/projection/VerticalPerspectiveProjection |
| Super-classes | PerspectiveProjection |
11.13. Polyconic Projections
| Identifier | /req/projections/Polyconic_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:GinzburgIVProjection, geosrs:GinzburgIXProjection, geosrs:GinzburgVIProjection, geosrs:GinzburgVProjection, geosrs:GottWagnerProjection, geosrs:HillEucyclicProjection, geosrs:LagrangeProjection, geosrs:LaskowskiProjection, geosrs:PolyconicProjection, geosrs:RectangularPolyconicProjection, geosrs:StabiusWernerIIIProjection, geosrs:StabiusWernerIProjection, geosrs:VanDerGrintenIIProjection, geosrs:VanDerGrintenIProjection, geosrs:VanDerGrintenIVProjection, geosrs:WagnerIXProjection, geosrs:WagnerVIIIProjection, geosrs:WagnerVIIProjection to be used in SPARQL graph patterns. |
11.13.1. Class: geosrs:GinzburgIVProjection
Table — geosrs:GinzburgIVProjection
| URI | https://w3id.org/geosrs/projection/GinzburgIVProjection |
| Super-classes | PolyconicProjection |
11.13.2. Class: geosrs:GinzburgIXProjection
Table — geosrs:GinzburgIXProjection
| URI | https://w3id.org/geosrs/projection/GinzburgIXProjection |
| Super-classes | PolyconicProjection |
11.13.3. Class: geosrs:GinzburgVIProjection
Table — geosrs:GinzburgVIProjection
| URI | https://w3id.org/geosrs/projection/GinzburgVIProjection |
| Super-classes | PolyconicProjection |
11.13.4. Class: geosrs:GinzburgVProjection
Table — geosrs:GinzburgVProjection
| URI | https://w3id.org/geosrs/projection/GinzburgVProjection |
| Super-classes | PolyconicProjection |
11.13.5. Class: geosrs:GottWagnerProjection
Table — geosrs:GottWagnerProjection
| URI | https://w3id.org/geosrs/projection/GottWagnerProjection |
| Super-classes | PolyconicProjection |
11.13.6. Class: geosrs:HillEucyclicProjection
Table — geosrs:HillEucyclicProjection
| URI | https://w3id.org/geosrs/projection/HillEucyclicProjection |
| Super-classes | PolyconicProjection |
11.13.7. Class: geosrs:LagrangeProjection
Table — geosrs:LagrangeProjection
| URI | https://w3id.org/geosrs/projection/LagrangeProjection |
| Super-classes | PolyconicProjection |
11.13.8. Class: geosrs:LaskowskiProjection
Table — geosrs:LaskowskiProjection
| URI | https://w3id.org/geosrs/projection/LaskowskiProjection |
| Super-classes | PolyconicProjection |
11.13.9. Class: geosrs:PolyconicProjection
Table — geosrs:PolyconicProjection
| URI | https://w3id.org/geosrs/projection/PolyconicProjection |
11.13.10. Class: geosrs:RectangularPolyconicProjection
Table — geosrs:RectangularPolyconicProjection
| URI | https://w3id.org/geosrs/projection/RectangularPolyconicProjection |
| Super-classes | PolyconicProjection |
11.13.11. Class: geosrs:StabiusWernerIIIProjection
Table — geosrs:StabiusWernerIIIProjection
| URI | https://w3id.org/geosrs/projection/StabiusWernerIIIProjection |
| Super-classes | PolyconicProjection |
11.13.12. Class: geosrs:StabiusWernerIProjection
Table — geosrs:StabiusWernerIProjection
| URI | https://w3id.org/geosrs/projection/StabiusWernerIProjection |
| Super-classes | PolyconicProjection |
11.13.13. Class: geosrs:VanDerGrintenIIProjection
Table — geosrs:VanDerGrintenIIProjection
| URI | https://w3id.org/geosrs/projection/VanDerGrintenIIProjection |
| Super-classes | PolyconicProjection |
11.13.14. Class: geosrs:VanDerGrintenIProjection
Table — geosrs:VanDerGrintenIProjection
| URI | https://w3id.org/geosrs/projection/VanDerGrintenIProjection |
| Super-classes | PolyconicProjection |
11.13.15. Class: geosrs:VanDerGrintenIVProjection
Table — geosrs:VanDerGrintenIVProjection
| URI | https://w3id.org/geosrs/projection/VanDerGrintenIVProjection |
| Super-classes | PolyconicProjection |
11.13.16. Class: geosrs:WagnerIXProjection
Table — geosrs:WagnerIXProjection
| URI | https://w3id.org/geosrs/projection/WagnerIXProjection |
| Super-classes | PolyconicProjection |
11.13.17. Class: geosrs:WagnerVIIIProjection
Table — geosrs:WagnerVIIIProjection
| URI | https://w3id.org/geosrs/projection/WagnerVIIIProjection |
| Super-classes | PolyconicProjection |
11.13.18. Class: geosrs:WagnerVIIProjection
Table — geosrs:WagnerVIIProjection
| URI | https://w3id.org/geosrs/projection/WagnerVIIProjection |
| Super-classes | PolyconicProjection |
11.14. Polyhedral Projections
| Identifier | /req/projections/Polyhedral_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:AuthaGraphProjection, geosrs:CahillKeyesProjection, geosrs:CollignonButterflyProjection, geosrs:DodecahedralProjection, geosrs:DymaxionProjection, geosrs:GnomonicButterflyProjection, geosrs:GnomonicCubedSphereProjection, geosrs:GnomonicIcosahedronProjection, geosrs:GuyouProjection, geosrs:IcosahedralProjection, geosrs:LeeProjection, geosrs:MyrahedalProjection, geosrs:OctantProjection, geosrs:PolyhedralProjection, geosrs:QuadrilateralizedSphericalCubeProjection, geosrs:WatermanButterflyProjection to be used in SPARQL graph patterns. |
11.14.1. Class: geosrs:AuthaGraphProjection
Table — geosrs:AuthaGraphProjection
| URI | https://w3id.org/geosrs/projection/AuthaGraphProjection |
| Super-classes | PolyhedralProjection |
11.14.2. Class: geosrs:CahillKeyesProjection
Table — geosrs:CahillKeyesProjection
| URI | https://w3id.org/geosrs/projection/CahillKeyesProjection |
| Super-classes | PolyhedralProjection |
11.14.3. Class: geosrs:CollignonButterflyProjection
Table — geosrs:CollignonButterflyProjection
| URI | https://w3id.org/geosrs/projection/CollignonButterflyProjection |
| Super-classes | PolyhedralProjection |
11.14.4. Class: geosrs:DodecahedralProjection
Table — geosrs:DodecahedralProjection
| URI | https://w3id.org/geosrs/projection/DodecahedralProjection |
| Super-classes | PolyhedralProjection |
11.14.5. Class: geosrs:DymaxionProjection
Table — geosrs:DymaxionProjection
| URI | https://w3id.org/geosrs/projection/DymaxionProjection |
| Super-classes | PolyhedralProjection |
11.14.6. Class: geosrs:GnomonicButterflyProjection
Table — geosrs:GnomonicButterflyProjection
| URI | https://w3id.org/geosrs/projection/GnomonicButterflyProjection |
| Super-classes | PolyhedralProjection |
11.14.7. Class: geosrs:GnomonicCubedSphereProjection
Table — geosrs:GnomonicCubedSphereProjection
| URI | https://w3id.org/geosrs/projection/GnomonicCubedSphereProjection |
| Super-classes | PolyhedralProjection |
11.14.8. Class: geosrs:GnomonicIcosahedronProjection
Table — geosrs:GnomonicIcosahedronProjection
| URI | https://w3id.org/geosrs/projection/GnomonicIcosahedronProjection |
| Super-classes | PolyhedralProjection |
11.14.9. Class: geosrs:GuyouProjection
Table — geosrs:GuyouProjection
| URI | https://w3id.org/geosrs/projection/GuyouProjection |
| Super-classes | PolyhedralProjection |
11.14.10. Class: geosrs:IcosahedralProjection
Table — geosrs:IcosahedralProjection
| URI | https://w3id.org/geosrs/projection/IcosahedralProjection |
| Super-classes | PolyhedralProjection |
11.14.11. Class: geosrs:LeeProjection
Table — geosrs:LeeProjection
| URI | https://w3id.org/geosrs/projection/LeeProjection |
| Super-classes | PolyhedralProjection |
11.14.12. Class: geosrs:MyrahedalProjection
Table — geosrs:MyrahedalProjection
| URI | https://w3id.org/geosrs/projection/MyrahedalProjection |
| Super-classes | PolyhedralProjection |
11.14.13. Class: geosrs:OctantProjection
Table — geosrs:OctantProjection
| URI | https://w3id.org/geosrs/projection/OctantProjection |
| Super-classes | PolyhedralProjection |
11.14.14. Class: geosrs:PolyhedralProjection
Table — geosrs:PolyhedralProjection
| URI | https://w3id.org/geosrs/projection/PolyhedralProjection |
11.14.15. Class: geosrs:QuadrilateralizedSphericalCubeProjection
Table — geosrs:QuadrilateralizedSphericalCubeProjection
| URI | https://w3id.org/geosrs/projection/QuadrilateralizedSphericalCubeProjection |
| Super-classes | PolyhedralProjection |
11.14.16. Class: geosrs:WatermanButterflyProjection
Table — geosrs:WatermanButterflyProjection
| URI | https://w3id.org/geosrs/projection/WatermanButterflyProjection |
| Super-classes | PolyhedralProjection |
11.15. Projection
| Identifier | /req/projections/Projection |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:Projection to be used in SPARQL graph patterns. |
11.15.1. Class: geosrs:Projection
Table — geosrs:Projection
| URI | https://w3id.org/geosrs/projection/Projection |
| Super-classes | Conversion |
11.16. Pseudo Azimuthal Projections
| Identifier | /req/projections/Pseudo_Azimuthal_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:AitoffObliqueProjection, geosrs:AitoffProjection, geosrs:BartholomewProjection, geosrs:HammerProjection, geosrs:PseudoAzimuthalProjection, geosrs:Strebe1995Projection, geosrs:WinkelTripelProjection to be used in SPARQL graph patterns. |
11.16.1. Class: geosrs:AitoffObliqueProjection
Table — geosrs:AitoffObliqueProjection
| URI | https://w3id.org/geosrs/projection/AitoffObliqueProjection |
| Super-classes | PseudoAzimuthalProjection |
11.16.2. Class: geosrs:AitoffProjection
Table — geosrs:AitoffProjection
| URI | https://w3id.org/geosrs/projection/AitoffProjection |
| Definition | A modified azimuthal projection whose graticule takes the form of an ellipse |
| Super-classes | PseudoAzimuthalProjection |
11.16.3. Class: geosrs:BartholomewProjection
Table — geosrs:BartholomewProjection
| URI | https://w3id.org/geosrs/projection/BartholomewProjection |
| Super-classes | WinkelTripelProjection |
11.16.4. Class: geosrs:HammerProjection
Table — geosrs:HammerProjection
| URI | https://w3id.org/geosrs/projection/HammerProjection |
| Super-classes | PseudoAzimuthalProjection |
11.16.5. Class: geosrs:PseudoAzimuthalProjection
Table — geosrs:PseudoAzimuthalProjection
| URI | https://w3id.org/geosrs/projection/PseudoAzimuthalProjection |
11.16.6. Class: geosrs:Strebe1995Projection
Table — geosrs:Strebe1995Projection
| URI | https://w3id.org/geosrs/projection/Strebe1995Projection |
| Super-classes | PseudoAzimuthalProjection |
11.16.7. Class: geosrs:WinkelTripelProjection
Table — geosrs:WinkelTripelProjection
| URI | https://w3id.org/geosrs/projection/WinkelTripelProjection |
| Super-classes | PseudoAzimuthalProjection |
11.17. Pseudo Conical Projections
| Identifier | /req/projections/Pseudo_Conical_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:AmericanPolyconicProjection, geosrs:BonneProjection, geosrs:BottomleyProjection, geosrs:NicolosiGlobularProjection, geosrs:PseudoConicalProjection, geosrs:PtolemyIIProjection, geosrs:StabiusWernerIIProjection, geosrs:WernerProjection to be used in SPARQL graph patterns. |
11.17.1. Class: geosrs:AmericanPolyconicProjection
Table — geosrs:AmericanPolyconicProjection
| URI | https://w3id.org/geosrs/projection/AmericanPolyconicProjection |
| Super-classes | PseudoConicalProjection |
| Example | geosrs:AmericanPolyconicProjection |
11.17.2. Class: geosrs:BonneProjection
Table — geosrs:BonneProjection
| URI | https://w3id.org/geosrs/projection/BonneProjection |
| Super-classes | PseudoConicalProjection |
11.17.3. Class: geosrs:BottomleyProjection
Table — geosrs:BottomleyProjection
| URI | https://w3id.org/geosrs/projection/BottomleyProjection |
| Super-classes | PseudoConicalProjection |
11.17.4. Class: geosrs:NicolosiGlobularProjection
Table — geosrs:NicolosiGlobularProjection
| URI | https://w3id.org/geosrs/projection/NicolosiGlobularProjection |
| Super-classes | PseudoConicalProjection |
11.17.5. Class: geosrs:PseudoConicalProjection
Table — geosrs:PseudoConicalProjection
| URI | https://w3id.org/geosrs/projection/PseudoConicalProjection |
11.17.6. Class: geosrs:PtolemyIIProjection
Table — geosrs:PtolemyIIProjection
| URI | https://w3id.org/geosrs/projection/PtolemyIIProjection |
| Super-classes | PseudoConicalProjection |
11.17.7. Class: geosrs:StabiusWernerIIProjection
Table — geosrs:StabiusWernerIIProjection
| URI | https://w3id.org/geosrs/projection/StabiusWernerIIProjection |
| Super-classes | BonneProjection |
11.17.8. Class: geosrs:WernerProjection
Table — geosrs:WernerProjection
| URI | https://w3id.org/geosrs/projection/WernerProjection |
| Super-classes | PseudoConicalProjection |
11.18. Pseudo Cylindrical Projections
11.18.1. Class: geosrs:ApianIIProjection
Table — geosrs:ApianIIProjection
| URI | https://w3id.org/geosrs/projection/ApianIIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.2. Class: geosrs:AtlantisProjection
Table — geosrs:AtlantisProjection
| URI | https://w3id.org/geosrs/projection/AtlantisProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.3. Class: geosrs:BaranyiIIIProjection
Table — geosrs:BaranyiIIIProjection
| URI | https://w3id.org/geosrs/projection/BaranyiIIIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.4. Class: geosrs:BaranyiIIProjection
Table — geosrs:BaranyiIIProjection
| URI | https://w3id.org/geosrs/projection/BaranyiIIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.5. Class: geosrs:BaranyiIProjection
Table — geosrs:BaranyiIProjection
| URI | https://w3id.org/geosrs/projection/BaranyiIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.6. Class: geosrs:BaranyiIVProjection
Table — geosrs:BaranyiIVProjection
| URI | https://w3id.org/geosrs/projection/BaranyiIVProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.7. Class: geosrs:BoggsEumorphicProjection
Table — geosrs:BoggsEumorphicProjection
| URI | https://w3id.org/geosrs/projection/BoggsEumorphicProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.8. Class: geosrs:BromleyProjection
Table — geosrs:BromleyProjection
| URI | https://w3id.org/geosrs/projection/BromleyProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.9. Class: geosrs:CabotProjection
Table — geosrs:CabotProjection
| URI | https://w3id.org/geosrs/projection/CabotProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.10. Class: geosrs:CollignonProjection
Table — geosrs:CollignonProjection
| URI | https://w3id.org/geosrs/projection/CollignonProjection |
| Definition | An equal-area pseudocylindrical projection that maps the sphere onto a triangle or diamond |
| Super-classes | PseudoCylindricalProjection |
11.18.11. Class: geosrs:CrasterParabolicProjection
Table — geosrs:CrasterParabolicProjection
| URI | https://w3id.org/geosrs/projection/CrasterParabolicProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.12. Class: geosrs:DeakinMinimumErrorProjection
Table — geosrs:DeakinMinimumErrorProjection
| URI | https://w3id.org/geosrs/projection/DeakinMinimumErrorProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.13. Class: geosrs:Eckert1Projection
Table — geosrs:Eckert1Projection
| URI | https://w3id.org/geosrs/projection/Eckert1Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.14. Class: geosrs:Eckert2Projection
Table — geosrs:Eckert2Projection
| URI | https://w3id.org/geosrs/projection/Eckert2Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.15. Class: geosrs:Eckert3Projection
Table — geosrs:Eckert3Projection
| URI | https://w3id.org/geosrs/projection/Eckert3Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.16. Class: geosrs:Eckert4Projection
Table — geosrs:Eckert4Projection
| URI | https://w3id.org/geosrs/projection/Eckert4Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.17. Class: geosrs:Eckert5Projection
Table — geosrs:Eckert5Projection
| URI | https://w3id.org/geosrs/projection/Eckert5Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.18. Class: geosrs:Eckert6Projection
Table — geosrs:Eckert6Projection
| URI | https://w3id.org/geosrs/projection/Eckert6Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.19. Class: geosrs:EqualEarthProjection
Table — geosrs:EqualEarthProjection
| URI | https://w3id.org/geosrs/projection/EqualEarthProjection |
| Super-classes | PseudoCylindricalProjection |
| Example | geosrs:EqualEarthProjection |
11.18.20. Class: geosrs:FaheyProjection
Table — geosrs:FaheyProjection
| URI | https://w3id.org/geosrs/projection/FaheyProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.21. Class: geosrs:FoucautProjection
Table — geosrs:FoucautProjection
| URI | https://w3id.org/geosrs/projection/FoucautProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.22. Class: geosrs:FoucautSinusoidalProjection
Table — geosrs:FoucautSinusoidalProjection
| URI | https://w3id.org/geosrs/projection/FoucautSinusoidalProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.23. Class: geosrs:FournierIIProjection
Table — geosrs:FournierIIProjection
| URI | https://w3id.org/geosrs/projection/FournierIIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.24. Class: geosrs:GinzburgVIIIProjection
Table — geosrs:GinzburgVIIIProjection
| URI | https://w3id.org/geosrs/projection/GinzburgVIIIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.25. Class: geosrs:GoodeHomolosineProjection
Table — geosrs:GoodeHomolosineProjection
| URI | https://w3id.org/geosrs/projection/GoodeHomolosineProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.26. Class: geosrs:HEALPixProjection
Table — geosrs:HEALPixProjection
| URI | https://w3id.org/geosrs/projection/HEALPixProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.27. Class: geosrs:HatanoAsymmetricalEqualAreaProjection
Table — geosrs:HatanoAsymmetricalEqualAreaProjection
| URI | https://w3id.org/geosrs/projection/HatanoAsymmetricalEqualAreaProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.28. Class: geosrs:HufnagelProjection
Table — geosrs:HufnagelProjection
| URI | https://w3id.org/geosrs/projection/HufnagelProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.29. Class: geosrs:Kavrayskiy7Projection
Table — geosrs:Kavrayskiy7Projection
| URI | https://w3id.org/geosrs/projection/Kavrayskiy7Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.30. Class: geosrs:LoximuthalProjection
Table — geosrs:LoximuthalProjection
| URI | https://w3id.org/geosrs/projection/LoximuthalProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.31. Class: geosrs:MayrProjection
Table — geosrs:MayrProjection
| URI | https://w3id.org/geosrs/projection/MayrProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.32. Class: geosrs:McBrydeThomasFlatPolarParabolicProjection
Table — geosrs:McBrydeThomasFlatPolarParabolicProjection
| URI | https://w3id.org/geosrs/projection/McBrydeThomasFlatPolarParabolicProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.33. Class: geosrs:McBrydeThomasFlatPolarQuarticProjection
Table — geosrs:McBrydeThomasFlatPolarQuarticProjection
| URI | https://w3id.org/geosrs/projection/McBrydeThomasFlatPolarQuarticProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.34. Class: geosrs:McBrydeThomasFlatPolarSinusoidalProjection
Table — geosrs:McBrydeThomasFlatPolarSinusoidalProjection
| URI | https://w3id.org/geosrs/projection/McBrydeThomasFlatPolarSinusoidalProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.35. Class: geosrs:McBrydeThomasIIProjection
Table — geosrs:McBrydeThomasIIProjection
| URI | https://w3id.org/geosrs/projection/McBrydeThomasIIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.36. Class: geosrs:McBrydeThomasIProjection
Table — geosrs:McBrydeThomasIProjection
| URI | https://w3id.org/geosrs/projection/McBrydeThomasIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.37. Class: geosrs:NaturalEarth2Projection
Table — geosrs:NaturalEarth2Projection
| URI | https://w3id.org/geosrs/projection/NaturalEarth2Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.38. Class: geosrs:NaturalEarthProjection
Table — geosrs:NaturalEarthProjection
| URI | https://w3id.org/geosrs/projection/NaturalEarthProjection |
| Definition | A pseudocylindrical map projection designed by Tom Patterson and introduced in 2008 |
| Super-classes | PseudoCylindricalProjection |
11.18.39. Class: geosrs:NellHammerProjection
Table — geosrs:NellHammerProjection
| URI | https://w3id.org/geosrs/projection/NellHammerProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.40. Class: geosrs:NellProjection
Table — geosrs:NellProjection
| URI | https://w3id.org/geosrs/projection/NellProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.41. Class: geosrs:OrteliusOvalProjection
Table — geosrs:OrteliusOvalProjection
| URI | https://w3id.org/geosrs/projection/OrteliusOvalProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.42. Class: geosrs:PseudoCylindricalProjection
Table — geosrs:PseudoCylindricalProjection
| URI | https://w3id.org/geosrs/projection/PseudoCylindricalProjection |
11.18.43. Class: geosrs:PutninsP1Projection
Table — geosrs:PutninsP1Projection
| URI | https://w3id.org/geosrs/projection/PutninsP1Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.44. Class: geosrs:PutninsP2Projection
Table — geosrs:PutninsP2Projection
| URI | https://w3id.org/geosrs/projection/PutninsP2Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.45. Class: geosrs:PutninsP3Projection
Table — geosrs:PutninsP3Projection
| URI | https://w3id.org/geosrs/projection/PutninsP3Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.46. Class: geosrs:PutninsP5Projection
Table — geosrs:PutninsP5Projection
| URI | https://w3id.org/geosrs/projection/PutninsP5Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.47. Class: geosrs:PutninsP6Projection
Table — geosrs:PutninsP6Projection
| URI | https://w3id.org/geosrs/projection/PutninsP6Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.48. Class: geosrs:QuarticAuthalicProjection
Table — geosrs:QuarticAuthalicProjection
| URI | https://w3id.org/geosrs/projection/QuarticAuthalicProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.49. Class: geosrs:RobinsonProjection
Table — geosrs:RobinsonProjection
| URI | https://w3id.org/geosrs/projection/RobinsonProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.50. Class: geosrs:SinusoidalProjection
Table — geosrs:SinusoidalProjection
| URI | https://w3id.org/geosrs/projection/SinusoidalProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.51. Class: geosrs:TheTimesProjection
Table — geosrs:TheTimesProjection
| URI | https://w3id.org/geosrs/projection/TheTimesProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.52. Class: geosrs:ToblerG1Projection
Table — geosrs:ToblerG1Projection
| URI | https://w3id.org/geosrs/projection/ToblerG1Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.53. Class: geosrs:ToblerHyperellipticalProjection
Table — geosrs:ToblerHyperellipticalProjection
| URI | https://w3id.org/geosrs/projection/ToblerHyperellipticalProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.54. Class: geosrs:WagnerIIIProjection
Table — geosrs:WagnerIIIProjection
| URI | https://w3id.org/geosrs/projection/WagnerIIIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.55. Class: geosrs:WagnerIIProjection
Table — geosrs:WagnerIIProjection
| URI | https://w3id.org/geosrs/projection/WagnerIIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.56. Class: geosrs:WagnerIProjection
Table — geosrs:WagnerIProjection
| URI | https://w3id.org/geosrs/projection/WagnerIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.57. Class: geosrs:WagnerIVProjection
Table — geosrs:WagnerIVProjection
| URI | https://w3id.org/geosrs/projection/WagnerIVProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.58. Class: geosrs:WagnerVIProjection
Table — geosrs:WagnerVIProjection
| URI | https://w3id.org/geosrs/projection/WagnerVIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.59. Class: geosrs:WagnerVProjection
Table — geosrs:WagnerVProjection
| URI | https://w3id.org/geosrs/projection/WagnerVProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.60. Class: geosrs:WerenskioldIProjection
Table — geosrs:WerenskioldIProjection
| URI | https://w3id.org/geosrs/projection/WerenskioldIProjection |
| Super-classes | PseudoCylindricalProjection |
11.18.61. Class: geosrs:PutninsP3’Projection
Table — geosrs:PutninsP3’Projection
| URI | https://w3id.org/geosrs/projection/PutninsP3’Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.62. Class: geosrs:PutninsP4’Projection
Table — geosrs:PutninsP4’Projection
| URI | https://w3id.org/geosrs/projection/PutninsP4’Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.63. Class: geosrs:PutninsP5’Projection
Table — geosrs:PutninsP5’Projection
| URI | https://w3id.org/geosrs/projection/PutninsP5’Projection |
| Super-classes | PseudoCylindricalProjection |
11.18.64. Class: geosrs:PutninsP6’Projection
Table — geosrs:PutninsP6’Projection
| URI | https://w3id.org/geosrs/projection/PutninsP6’Projection |
| Super-classes | PseudoCylindricalProjection |
11.19. Stereographic Projections
| Identifier | /req/projections/Stereographic_Projections |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:GallStereographicProjection, geosrs:MillerOblatedStereographicProjection, geosrs:RoussilheProjection to be used in SPARQL graph patterns. |
11.19.1. Class: geosrs:GallStereographicProjection
Table — geosrs:GallStereographicProjection
| URI | https://w3id.org/geosrs/projection/GallStereographicProjection |
| Super-classes | StereographicProjection |
11.19.2. Class: geosrs:MillerOblatedStereographicProjection
Table — geosrs:MillerOblatedStereographicProjection
| URI | https://w3id.org/geosrs/projection/MillerOblatedStereographicProjection |
| Super-classes | StereographicProjection |
11.19.3. Class: geosrs:RoussilheProjection
Table — geosrs:RoussilheProjection
| URI | https://w3id.org/geosrs/projection/RoussilheProjection |
| Super-classes | StereographicProjection |
12. Planet Module
This clause establishes the PLANET Requirements class, with IRI /req/planet, which has a corresponding Conformance Class, PLANET, with IRI /conf/planet.
Figure 7
| Identifier | /req/planet |
|---|---|
| Target type | Implementation Specification |
| Conformance class | Conformance class A.7: /conf/planet |
| requirement | /req/planet/Interstellar_Body |
12.1. Interstellar Body
| Identifier | /req/planet/Interstellar_Body |
|---|---|
| Statement | Implementations shall allow the RDFS classes geosrs:ArtificialSatellite, geosrs:Asteroid, geosrs:Comet, geosrs:DwarfPlanet, geosrs:InterstellarBody, geosrs:Moon, geosrs:NaturalSatellite, geosrs:Planet, geosrs:PlanetStatus, geosrs:Plutoid, geosrs:Star, geosrs:Satellite to be used in SPARQL graph patterns. |
12.1.1. Class: geosrs:ArtificialSatellite
Table — geosrs:ArtificialSatellite
| URI | https://w3id.org/geosrs/planet/ArtificialSatellite |
| Super-classes | Satellite |
12.1.2. Class: geosrs:Asteroid
Table — geosrs:Asteroid
| URI | https://w3id.org/geosrs/planet/Asteroid |
| Definition | Asteroid, any of a host of small bodies, about 1000 km (600 miles) or less in diameter, that orbit the Sun primarily between the orbits of Mars and Jupiter in a nearly flat ring called the asteroid belt (source:https://www.britannica.com/science/asteroid) |
| Super-classes | InterstellarBody |
12.1.3. Class: geosrs:Comet
Table — geosrs:Comet
| URI | https://w3id.org/geosrs/planet/Comet |
| Super-classes | InterstellarBody |
12.1.4. Class: geosrs:DwarfPlanet
Table — geosrs:DwarfPlanet
| URI | https://w3id.org/geosrs/planet/DwarfPlanet |
12.1.5. Class: geosrs:InterstellarBody
Table — geosrs:InterstellarBody
| URI | https://w3id.org/geosrs/planet/InterstellarBody |
12.1.6. Class: geosrs:Moon
Table — geosrs:Moon
| URI | https://w3id.org/geosrs/planet/Moon |
| Super-classes | InterstellarBody |
12.1.7. Class: geosrs:NaturalSatellite
Table — geosrs:NaturalSatellite
| URI | https://w3id.org/geosrs/planet/NaturalSatellite |
| Super-classes | Satellite |
12.1.8. Class: geosrs:Planet
Table — geosrs:Planet
| URI | https://w3id.org/geosrs/planet/Planet |
| Super-classes | InterstellarBody |
12.1.9. Class: geosrs:PlanetStatus
Table — geosrs:PlanetStatus
| URI | https://w3id.org/geosrs/planet/PlanetStatus |
12.1.11. Class: geosrs:Star
Table — geosrs:Star
| URI | https://w3id.org/geosrs/planet/Star |
| Super-classes | InterstellarBody |
12.1.12. Class: geosrs:Satellite
Table — geosrs:Satellite
| URI | https://w3id.org/geosrs/planet/Satellite |
13. Common Instances
This clause establishes common instances which are needed in CRS specifications as Requirement class INSTANCES, with IRI /req/instances, which has a corresponding Conformance Class, INSTANCES, with IRI /conf/instances.
| Identifier | /req/instances |
|---|---|
| Target type | Implementation Specification |
| Conformance class | Conformance class A.8: /conf/instances |
| requirement | /req/instances/Coordinate_System_Axis /req/instances/Spheroids /req/instances/SRS_Literal_Types |
13.1. Coordinate System Axis
| Identifier | /req/instances/Coordinate_System_Axis |
|---|---|
| Statement | Implementations shall allow the RDFS instances geosrs:Down, geosrs:East, geosrs:North, geosrs:South, geosrs:Up, geosrs:West to be used in SPARQL graph patterns. |
13.1.1. Instance: geosrs:Down
Table — geosrs:Down
| URI | https://w3id.org/geosrs/Down |
| Type | geosrs:AxisDirection |
| Definition | Downwards axis direction |
13.1.2. Instance: geosrs:East
Table — geosrs:East
| URI | https://w3id.org/geosrs/East |
| Type | geosrs:AxisDirection |
| Definition | east axis direction |
13.1.3. Instance: geosrs:North
Table — geosrs:North
| URI | https://w3id.org/geosrs/North |
| Type | geosrs:AxisDirection |
| Definition | North axis direction |
13.1.4. Instance: geosrs:South
Table — geosrs:South
| URI | https://w3id.org/geosrs/South |
| Type | geosrs:AxisDirection |
| Definition | South axis direction |
13.1.5. Instance: geosrs:Up
Table — geosrs:Up
| URI | https://w3id.org/geosrs/Up |
| Type | geosrs:AxisDirection |
| Definition | Up axis direction |
13.1.6. Instance: geosrs:West
Table — geosrs:West
| URI | https://w3id.org/geosrs/West |
| Type | geosrs:AxisDirection |
| Definition | West axis direction |
13.2. SRS Literal Types
| Identifier | /req/instances/SRS_Literal_Types |
|---|---|
| Statement | Implementations shall allow the RDFS instances geosrs:proj4Literal, geosrs:projJSONLiteral, geosrs:wktLiteral to be used in SPARQL graph patterns. |
13.2.1. Instance: geosrs:proj4Literal
Table — geosrs:proj4Literal
| URI | https://w3id.org/geosrs/proj4Literal |
| Type | rdf:Datatype[rdf:Datatype] |
| Definition | A literal which stores a proj4 String |
| Example | geosrs:proj4Literal |
13.2.2. Instance: geosrs:projJSONLiteral
Table — geosrs:projJSONLiteral
| URI | https://w3id.org/geosrs/projJSONLiteral |
| Type | rdf:Dataype[rdf:Dataype] |
| Definition | A literal which stores a projection JSON (ProjJSON) String |
| Example | geosrs:projJSONLiteral |
13.2.3. Instance: geosrs:wktLiteral
Table — geosrs:wktLiteral
| URI | https://w3id.org/geosrs/wktLiteral |
| Type | rdf:Datatype[rdf:Datatype] |
| Definition | A literal which stores a WKT for CRS String |
| Example | geosrs:wktLiteral |
13.3. Spheroids
| Identifier | /req/instances/Spheroids |
|---|---|
| Statement | Implementations shall allow the RDFS instances geosrs:GRS1980, geosrs:GRS67, geosrs:PZ90, geosrs:Airy1830, geosrs:AiryModified1849, geosrs:International1924, geosrs:AustralianNationalSpheroid, geosrs:Everest1930, geosrs:Clarke1866, geosrs:Plessis1817, geosrs:Danish1876, geosrs:Struve1860, geosrs:IAG1975, geosrs:Clarke1858, geosrs:Clarke1880, geosrs:Helmert1906, geosrs:CGCS2000, geosrs:GSK-2011, geosrs:Zach1812, geosrs:Clarke1880ARC, geosrs:Clarke1880IGN, geosrs:WGS66, geosrs:WGS72, geosrs:WGS84, geosrs:Krassowsky1940 to be used in SPARQL graph patterns. |
13.3.1. Instance: geosrs:GRS1980
Table — geosrs:GRS1980
| URI | https://w3id.org/geosrs/GRS1980 |
| Type | geosrs:Ellipsoid |
| Definition | GRS 1980 Ellipsoid |
| Example | geosrs:GRS1980 |
13.3.2. Instance: geosrs:GRS67
Table — geosrs:GRS67
| URI | https://w3id.org/geosrs/GRS67 |
| Type | geosrs:Ellipsoid |
| Definition | GRS 67 Ellipsoid |
| Example | geosrs:GRS67 |
13.3.3. Instance: geosrs:PZ90
Table — geosrs:PZ90
| URI | https://w3id.org/geosrs/PZ90 |
| Type | geosrs:Ellipsoid |
| Definition | PZ 90 Ellipsoid |
| Example | geosrs:PZ90 |
13.3.4. Instance: geosrs:Airy1830
Table — geosrs:Airy1830
| URI | https://w3id.org/geosrs/Airy1830 |
| Type | geosrs:Ellipsoid |
| Definition | Airy 1830 Ellipsoid |
| Example | geosrs:Airy1830 |
13.3.5. Instance: geosrs:AiryModified1849
Table — geosrs:AiryModified1849
| URI | https://w3id.org/geosrs/AiryModified1849 |
| Type | geosrs:Ellipsoid |
| Definition | Airy 1849 Modified Ellipsoid |
| Example | geosrs:AiryModified1849 |
13.3.6. Instance: geosrs:International1924
Table — geosrs:International1924
| URI | https://w3id.org/geosrs/International1924 |
| Type | geosrs:Ellipsoid |
| Definition | International 1924 Ellipsoid |
| Example | geosrs:International1924 |
13.3.7. Instance: geosrs:AustralianNationalSpheroid
Table — geosrs:AustralianNationalSpheroid
| URI | https://w3id.org/geosrs/AustralianNationalSpheroid |
| Type | geosrs:Ellipsoid |
| Definition | Australian National Spheroid |
| Example | geosrs:AustralianNationalSpheroid |
13.3.8. Instance: geosrs:Everest1930
Table — geosrs:Everest1930
| URI | https://w3id.org/geosrs/Everest1930 |
| Type | geosrs:Ellipsoid |
| Definition | Everest 1930 Spheroid |
13.3.9. Instance: geosrs:Clarke1866
Table — geosrs:Clarke1866
| URI | https://w3id.org/geosrs/Clarke1866 |
| Type | geosrs:Ellipsoid |
| Definition | Clarke 1866 Spheroid |
| Example | geosrs:Clarke1866 |
13.3.10. Instance: geosrs:Plessis1817
Table — geosrs:Plessis1817
| URI | https://w3id.org/geosrs/Plessis1817 |
| Type | geosrs:Ellipsoid |
| Definition | Plessis 1817 Spheroid |
| Example | geosrs:Plessis1817 |
13.3.11. Instance: geosrs:Danish1876
Table — geosrs:Danish1876
| URI | https://w3id.org/geosrs/Danish1876 |
| Type | geosrs:Ellipsoid |
| Definition | Danish 1876 Spheroid |
| Example | geosrs:Danish1876 |
13.3.12. Instance: geosrs:Struve1860
Table — geosrs:Struve1860
| URI | https://w3id.org/geosrs/Struve1860 |
| Type | geosrs:Ellipsoid |
| Definition | Struve 1860 Spheroid |
| Example | geosrs:Struve1860 |
13.3.13. Instance: geosrs:IAG1975
Table — geosrs:IAG1975
| URI | https://w3id.org/geosrs/IAG1975 |
| Type | geosrs:Ellipsoid |
| Definition | IAG 1975 Spheroid |
| Example | geosrs:IAG1975 |
13.3.14. Instance: geosrs:Clarke1858
Table — geosrs:Clarke1858
| URI | https://w3id.org/geosrs/Clarke1858 |
| Type | geosrs:Ellipsoid |
| Definition | Clarke 1858 Spheroid |
| Example | geosrs:Clarke1858 |
13.3.15. Instance: geosrs:Clarke1880
Table — geosrs:Clarke1880
| URI | https://w3id.org/geosrs/Clarke1880 |
| Type | geosrs:Ellipsoid |
| Definition | Clarke 1880 Spheroid |
| Example | geosrs:Clarke1880 |
13.3.16. Instance: geosrs:Helmert1906
Table — geosrs:Helmert1906
| URI | https://w3id.org/geosrs/Helmert1906 |
| Type | geosrs:Ellipsoid |
| Definition | Helmert 1906 Spheroid |
| Example | geosrs:Helmert1906 |
13.3.17. Instance: geosrs:CGCS2000
Table — geosrs:CGCS2000
| URI | https://w3id.org/geosrs/CGCS2000 |
| Type | geosrs:Ellipsoid |
| Definition | CGCS2000 Spheroid |
| Example | geosrs:CGCS2000 |
13.3.18. Instance: geosrs:GSK-2011
Table — geosrs:GSK-2011
| URI | https://w3id.org/geosrs/GSK-2011 |
| Type | geosrs:Ellipsoid |
| Definition | GSK-2011 Spheroid |
13.3.19. Instance: geosrs:Zach1812
Table — geosrs:Zach1812
| URI | https://w3id.org/geosrs/Zach1812 |
| Type | geosrs:Ellipsoid |
| Definition | Zach 1812 Spheroid |
| Example | geosrs:Zach1812 |
13.3.20. Instance: geosrs:Clarke1880ARC
Table — geosrs:Clarke1880ARC
| URI | https://w3id.org/geosrs/Clarke1880ARC |
| Type | geosrs:Ellipsoid |
| Definition | Clarke 1880 (Arc) Spheroid |
| Example | geosrs:Clarke1880ARC |
13.3.21. Instance: geosrs:Clarke1880IGN
Table — geosrs:Clarke1880IGN
| URI | https://w3id.org/geosrs/Clarke1880IGN |
| Type | geosrs:Ellipsoid |
| Definition | Clarke 1880 (Ing) Spheroid |
| Example | geosrs:Clarke1880IGN |
13.3.22. Instance: geosrs:WGS66
Table — geosrs:WGS66
| URI | https://w3id.org/geosrs/WGS66 |
| Type | geosrs:Ellipsoid |
| Definition | WGS 66 Spheroid |
13.3.23. Instance: geosrs:WGS72
Table — geosrs:WGS72
| URI | https://w3id.org/geosrs/WGS72 |
| Type | geosrs:Ellipsoid |
| Definition | WGS 72 Spheroid |
| Example | geosrs:WGS72 |
13.3.24. Instance: geosrs:WGS84
Table — geosrs:WGS84
| URI | https://w3id.org/geosrs/WGS84 |
| Type | geosrs:Ellipsoid |
| Definition | WGS 84 Spheroid |
| Example | geosrs:WGS84 |
13.3.25. Instance: geosrs:Krassowsky1940
Table — geosrs:Krassowsky1940
| URI | https://w3id.org/geosrs/Krassowsky1940 |
| Type | geosrs:Ellipsoid |
| Definition | Krassowsky 1940 Spheroid |
| Example | geosrs:Krassowsky1940 |
Annex A
(normative)
Abstract Test Suite
A.0. Overview
This Annex lists tests for the Conformance Classes defined in the main body sections of this Specification with links to their Requirements and test purpose method and type. Conformance classes may be used to signify the compatibility of a given implementation to parts of the CRS Ontology standard. They may be stated as part of a SPARQL 1.1 Service Description [SPARQLSERVDESC] .
A.1. Conformance Class: Core
| Identifier | /conf/core |
|---|---|
| Requirements class | Requirements class 1: /req/core |
| Conformance tests | Abstract test A.1: /conf/core/Coordinate_Reference_System_Parameters Abstract test A.2: /conf/core/Coordinate_Reference_System_Types Abstract test A.3: /conf/core/Coordinate_Reference_System_Properties |
A.1.1. Coordinate Reference System Parameters
| Identifier | /conf/core/Coordinate_Reference_System_Parameters |
|---|---|
| Requirement | Requirement 1: /req/core/Coordinate_Reference_System_Parameters |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:AreaOfUse geosrs:Extent geosrs:GeographicBoundingBox geosrs:AxesList geosrs:SingleCRSList return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:AreaOfUse geosrs:Extent geosrs:GeographicBoundingBox geosrs:AxesList geosrs:SingleCRSList |
A.1.2. Coordinate Reference System Types
A.1.3. Coordinate Reference System Properties
| Identifier | /conf/core/Coordinate_Reference_System_Properties |
|---|---|
| Requirement | Requirement 2: /req/core/Coordinate_Reference_System_Properties |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:method return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | |
A.2. Conformance Class: Co
| Identifier | /conf/co |
|---|---|
| Requirements class | Requirements class 2: /req/co |
| Conformance tests | Abstract test A.4: /conf/co/Coordinate_Operation_Methods Abstract test A.5: /conf/co/Coordinate_Operation_Parameters Abstract test A.6: /conf/co/Coordinate_Operation_Categories Abstract test A.7: /conf/co/Coordinate_Operation_Properties |
A.2.1. Coordinate Operation Methods
| Identifier | /conf/co/Coordinate_Operation_Methods |
|---|---|
| Requirement | Requirement 5: /req/co/Coordinate_Operation_Methods |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:CoordinateOperation geosrs:PassThroughOperation geosrs:ConcatenatedOperation geosrs:SingleOperation geosrs:Transformation geosrs:Conversion geosrs:PointMotionOperation geosrs:OperationMethod return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:CoordinateOperation geosrs:PassThroughOperation geosrs:ConcatenatedOperation geosrs:SingleOperation geosrs:Transformation geosrs:Conversion geosrs:PointMotionOperation geosrs:OperationMethod |
A.2.2. Coordinate Operation Parameters
| Identifier | /conf/co/Coordinate_Operation_Parameters |
|---|---|
| Requirement | Requirement 6: /req/co/Coordinate_Operation_Parameters |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:GeneralOperationParameter geosrs:OperationParameterGroup geosrs:OperationParameter geosrs:GeneralParameterValue geosrs:ParameterValueGroup geosrs:OperationParameterValue return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:GeneralOperationParameter geosrs:OperationParameterGroup geosrs:OperationParameter geosrs:GeneralParameterValue geosrs:ParameterValueGroup geosrs:OperationParameterValue |
A.2.3. Coordinate Operation Categories
| Identifier | /conf/co/Coordinate_Operation_Categories |
|---|---|
| Requirement | Requirement 4: /req/co/Coordinate_Operation_Categories |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:GeographicObject geosrs:RegisterOperations geosrs:ScaleOperation geosrs:RotationOperation geosrs:IdentityOperation geosrs:ShearOperation geosrs:TranslationOperation geosrs:AffineTransformationOperation geosrs:CoordinateTransformationOperation return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:GeographicObject geosrs:RegisterOperations geosrs:ScaleOperation geosrs:RotationOperation geosrs:IdentityOperation geosrs:ShearOperation geosrs:TranslationOperation geosrs:AffineTransformationOperation geosrs:CoordinateTransformationOperation |
A.2.4. Coordinate Operation Properties
| Identifier | /conf/co/Coordinate_Operation_Properties |
|---|---|
| Requirement | Requirement 7: /req/co/Coordinate_Operation_Properties |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:derivingConversion geosrs:parameter geosrs:sourceCRS geosrs:targetCRS return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:derivingConversion geosrs:parameter geosrs:sourceCRS geosrs:targetCRS |
A.3. Conformance Class: Cs
| Identifier | /conf/cs |
|---|---|
| Requirements class | Requirements class 3: /req/cs |
| Conformance tests | Abstract test A.8: /conf/cs/Temporal_Coordinate_Systems Abstract test A.9: /conf/cs/3D_Coordinate_Systems Abstract test A.10: /conf/cs/Coordinate_System_Types Abstract test A.11: /conf/cs/Celestial_Coordinate_Systems Abstract test A.12: /conf/cs/Coordinate_System_Components Abstract test A.13: /conf/cs/Coordinate_System_Properties |
A.3.1. Temporal Coordinate Systems
| Identifier | /conf/cs/Temporal_Coordinate_Systems |
|---|---|
| Requirement | Requirement 13: /req/cs/Temporal_Coordinate_Systems |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:1DCoordinateSystem geosrs:DateTimeTemporalCoordinateSystem geosrs:TemporalCountCoordinateSystem geosrs:TemporalCoordinateSystem geosrs:TemporalMeasureCoordinateSystem return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:1DCoordinateSystem geosrs:DateTimeTemporalCoordinateSystem geosrs:TemporalCountCoordinateSystem geosrs:TemporalCoordinateSystem geosrs:TemporalMeasureCoordinateSystem |
A.3.2. 3D Coordinate Systems
| Identifier | /conf/cs/3D_Coordinate_Systems |
|---|---|
| Requirement | Requirement 8: /req/cs/3D_Coordinate_Systems |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:3DCoordinateSystem geosrs:ConicalCoordinateSystem geosrs:CylindricalCoordinateSystem geosrs:EllipsoidalCoordinateSystem geosrs:SphericalCoordinateSystem return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:3DCoordinateSystem geosrs:ConicalCoordinateSystem geosrs:CylindricalCoordinateSystem geosrs:EllipsoidalCoordinateSystem geosrs:SphericalCoordinateSystem |
A.3.3. Coordinate System Types
A.3.4. Celestial Coordinate Systems
| Identifier | /conf/cs/Celestial_Coordinate_Systems |
|---|---|
| Requirement | Requirement 9: /req/cs/Celestial_Coordinate_Systems |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:CelestialCoordinateSystem geosrs:EclipticCoordinateSystem geosrs:EquatorialCoordinateSystem geosrs:GalacticCoordinateSystem geosrs:HorizontalCoordinateSystem geosrs:PerifocalCoordinateSystem geosrs:SuperGalacticCS return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:CelestialCoordinateSystem geosrs:EclipticCoordinateSystem geosrs:EquatorialCoordinateSystem geosrs:GalacticCoordinateSystem geosrs:HorizontalCoordinateSystem geosrs:PerifocalCoordinateSystem geosrs:SuperGalacticCS |
A.3.5. Coordinate System Components
| Identifier | /conf/cs/Coordinate_System_Components |
|---|---|
| Requirement | Requirement 10: /req/cs/Coordinate_System_Components |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:CoordinateSystemAxis return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | |
A.3.6. Coordinate System Properties
| Identifier | /conf/cs/Coordinate_System_Properties |
|---|---|
| Requirement | Requirement 11: /req/cs/Coordinate_System_Properties |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:axis geosrs:axisDirection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | |
A.4. Conformance Class: Datum
| Identifier | /conf/datum |
|---|---|
| Requirements class | Requirements class 4: /req/datum |
| Conformance tests | Abstract test A.14: /conf/datum/Datum_Types Abstract test A.15: /conf/datum/Datum_Parameters Abstract test A.16: /conf/datum/Spheroid_Types Abstract test A.17: /conf/datum/Spheroid_Properties Abstract test A.18: /conf/datum/Datum_Properties |
A.4.1. Datum Types
| Identifier | /conf/datum/Datum_Types |
|---|---|
| Requirement | Requirement 16: /req/datum/Datum_Types |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:Datum geosrs:GeodeticDatum geosrs:DynamicGeodeticReferenceFrame geosrs:VerticalDatum geosrs:DynamicVerticalDatum geosrs:ParametricDatum geosrs:EngineeringDatum geosrs:TemporalDatum geosrs:DatumEnsemble return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:Datum geosrs:GeodeticDatum geosrs:DynamicGeodeticReferenceFrame geosrs:VerticalDatum geosrs:DynamicVerticalDatum geosrs:ParametricDatum geosrs:EngineeringDatum geosrs:TemporalDatum geosrs:DatumEnsemble |
A.4.2. Datum Parameters
| Identifier | /conf/datum/Datum_Parameters |
|---|---|
| Requirement | Requirement 14: /req/datum/Datum_Parameters |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:PrimeMeridian geosrs:DefiningParameter return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | |
A.4.3. Spheroid Types
| Identifier | /conf/datum/Spheroid_Types |
|---|---|
| Requirement | Requirement 18: /req/datum/Spheroid_Types |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:Ellipsoid geosrs:TriaxialEllipsoid return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | |
A.4.4. Spheroid Properties
| Identifier | /conf/datum/Spheroid_Properties |
|---|---|
| Requirement | Requirement 17: /req/datum/Spheroid_Properties |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:eccentricity geosrs:inverseFlattening geosrs:isSphere geosrs:semiMajorAxis geosrs:semiMinorAxis return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:eccentricity geosrs:inverseFlattening geosrs:isSphere geosrs:semiMajorAxis geosrs:semiMinorAxis |
A.4.5. Datum Properties
| Identifier | /conf/datum/Datum_Properties |
|---|---|
| Requirement | Requirement 15: /req/datum/Datum_Properties |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:datumDefiningParameter geosrs:ellipsoid geosrs:primeMeridian return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:datumDefiningParameter geosrs:ellipsoid geosrs:primeMeridian |
A.5. Conformance Class: Srsapplication
| Identifier | /conf/srsapplication |
|---|---|
| Requirements class | Requirements class 5: /req/srsapplication |
| Conformance tests | Abstract test A.19: /conf/srsapplication/SRS_Application_Types Abstract test A.20: /conf/srsapplication/Map_Types |
A.5.1. SRS Application Types
| Identifier | /conf/srsapplication/SRS_Application_Types |
|---|---|
| Requirement | Requirement 20: /req/srsapplication/SRS_Application_Types |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:SRSApplication geosrs:SpatialReferencing geosrs:EngineeringSurvey geosrs:SatelliteSurvey geosrs:SatelliteNavigation geosrs:CoastalHydrography geosrs:OffshoreEngineering geosrs:Hydrography geosrs:Drilling geosrs:OilAndGasExploration return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:SRSApplication geosrs:SpatialReferencing geosrs:EngineeringSurvey geosrs:SatelliteSurvey geosrs:SatelliteNavigation geosrs:CoastalHydrography geosrs:OffshoreEngineering geosrs:Hydrography geosrs:Drilling geosrs:OilAndGasExploration |
A.5.2. Map Types
| Identifier | /conf/srsapplication/Map_Types |
|---|---|
| Requirement | Requirement 19: /req/srsapplication/Map_Types |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:CadastreMap geosrs:NauticalChart geosrs:ThematicMap geosrs:TopographicMap geosrs:WeatherMap return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:CadastreMap geosrs:NauticalChart geosrs:ThematicMap geosrs:TopographicMap geosrs:WeatherMap |
A.6. Conformance Class: Projections
A.6.1. Lenticular Projections
A.6.2. Conformal Projections
| Identifier | /conf/projections/Conformal_Projections |
|---|---|
| Requirement | Requirement 24: /req/projections/Conformal_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:AdamsProjection geosrs:AdamsWorldInASquareIIProjection geosrs:AdamsWorldInASquareIProjection geosrs:AugustEpicycloidalProjection geosrs:CoxConformalProjection geosrs:EisenlohrProjection geosrs:GS50Projection geosrs:PeirceQuincuncialProjection geosrs:StereographicProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:AdamsProjection geosrs:AdamsWorldInASquareIIProjection geosrs:AdamsWorldInASquareIProjection geosrs:AugustEpicycloidalProjection geosrs:CoxConformalProjection geosrs:EisenlohrProjection geosrs:GS50Projection geosrs:PeirceQuincuncialProjection geosrs:StereographicProjection |
A.6.3. Minimum Error Projections
| Identifier | /conf/projections/Minimum_Error_Projections |
|---|---|
| Requirement | Requirement 31: /req/projections/Minimum_Error_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:AiryProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | |
A.6.4. Pseudo Azimuthal Projections
| Identifier | /conf/projections/Pseudo_Azimuthal_Projections |
|---|---|
| Requirement | Requirement 36: /req/projections/Pseudo_Azimuthal_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:AitoffObliqueProjection geosrs:AitoffProjection geosrs:BartholomewProjection geosrs:HammerProjection geosrs:PseudoAzimuthalProjection geosrs:Strebe1995Projection geosrs:WinkelTripelProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:AitoffObliqueProjection geosrs:AitoffProjection geosrs:BartholomewProjection geosrs:HammerProjection geosrs:PseudoAzimuthalProjection geosrs:Strebe1995Projection geosrs:WinkelTripelProjection |
A.6.5. Equal Area Projections
A.6.6. Pseudo Conical Projections
| Identifier | /conf/projections/Pseudo_Conical_Projections |
|---|---|
| Requirement | Requirement 37: /req/projections/Pseudo_Conical_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:AmericanPolyconicProjection geosrs:BonneProjection geosrs:BottomleyProjection geosrs:NicolosiGlobularProjection geosrs:PseudoConicalProjection geosrs:PtolemyIIProjection geosrs:StabiusWernerIIProjection geosrs:WernerProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:AmericanPolyconicProjection geosrs:BonneProjection geosrs:BottomleyProjection geosrs:NicolosiGlobularProjection geosrs:PseudoConicalProjection geosrs:PtolemyIIProjection geosrs:StabiusWernerIIProjection geosrs:WernerProjection |
A.6.7. Globular Projections
| Identifier | /conf/projections/Globular_Projections |
|---|---|
| Requirement | Requirement 29: /req/projections/Globular_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:ApianGlobularIProjection geosrs:BaconGlobularProjection geosrs:FournierGlobularIProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:ApianGlobularIProjection geosrs:BaconGlobularProjection geosrs:FournierGlobularIProjection |
A.6.8. Pseudo Cylindrical Projections
A.6.9. Archaic Projections
| Identifier | /conf/projections/Archaic_Projections |
|---|---|
| Requirement | Requirement 21: /req/projections/Archaic_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:ArchaicProjection geosrs:PtolemyIProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | |
A.6.10. Cylindrical Projections
A.6.11. Compromise Projections
A.6.12. Polyhedral Projections
A.6.13. Equidistant Projections
| Identifier | /conf/projections/Equidistant_Projections |
|---|---|
| Requirement | Requirement 28: /req/projections/Equidistant_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:AzimuthalEquidistantProjection geosrs:BerghausStarProjection geosrs:CassiniProjection geosrs:EquidistantConicProjection geosrs:EquidistantCylindricalProjection geosrs:EquidistantProjection geosrs:EquirectangularProjection geosrs:ObliquePlateCarreeProjection geosrs:PlateCarreeProjection geosrs:TwoPointEquidistantProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:AzimuthalEquidistantProjection geosrs:BerghausStarProjection geosrs:CassiniProjection geosrs:EquidistantConicProjection geosrs:EquidistantCylindricalProjection geosrs:EquidistantProjection geosrs:EquirectangularProjection geosrs:ObliquePlateCarreeProjection geosrs:PlateCarreeProjection geosrs:TwoPointEquidistantProjection |
A.6.14. Azimuthal Projections
| Identifier | /conf/projections/Azimuthal_Projections |
|---|---|
| Requirement | Requirement 22: /req/projections/Azimuthal_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:AzimuthalProjection geosrs:BreusingGeometricProjection geosrs:BreusingHarmonicProjection geosrs:GinzburgIIProjection geosrs:GinzburgIProjection geosrs:GnomonicProjection geosrs:JamesAzimuthalProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:AzimuthalProjection geosrs:BreusingGeometricProjection geosrs:BreusingHarmonicProjection geosrs:GinzburgIIProjection geosrs:GinzburgIProjection geosrs:GnomonicProjection geosrs:JamesAzimuthalProjection |
A.6.15. Conical Projections
| Identifier | /conf/projections/Conical_Projections |
|---|---|
| Requirement | Requirement 25: /req/projections/Conical_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:BipolarObliqueConicConformalProjection geosrs:CentralConicProjection geosrs:HerschelConformalConicProjection geosrs:Krovak geosrs:LambertConformalConicProjection geosrs:MurdochIIIProjection geosrs:MurdochIIProjection geosrs:MurdochIProjection geosrs:SchjerningIProjection geosrs:VitkovskyIProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:BipolarObliqueConicConformalProjection geosrs:CentralConicProjection geosrs:HerschelConformalConicProjection geosrs:Krovak geosrs:LambertConformalConicProjection geosrs:MurdochIIIProjection geosrs:MurdochIIProjection geosrs:MurdochIProjection geosrs:SchjerningIProjection geosrs:VitkovskyIProjection |
A.6.16. Perspective Projections
A.6.17. Stereographic Projections
| Identifier | /conf/projections/Stereographic_Projections |
|---|---|
| Requirement | Requirement 39: /req/projections/Stereographic_Projections |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:GallStereographicProjection geosrs:MillerOblatedStereographicProjection geosrs:RoussilheProjection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:GallStereographicProjection geosrs:MillerOblatedStereographicProjection geosrs:RoussilheProjection |
A.6.18. Polyconic Projections
A.6.19. Projection
| Identifier | /conf/projections/Projection |
|---|---|
| Requirement | Requirement 35: /req/projections/Projection |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:Projection return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | |
A.7. Conformance Class: Planet
| Identifier | /conf/planet |
|---|---|
| Requirements class | Requirements class 7: /req/planet |
| Conformance test | Abstract test A.40: /conf/planet/Interstellar_Body |
A.7.1. Interstellar Body
| Identifier | /conf/planet/Interstellar_Body |
|---|---|
| Requirement | Requirement 40: /req/planet/Interstellar_Body |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:ArtificialSatellite geosrs:Asteroid geosrs:Comet geosrs:DwarfPlanet geosrs:InterstellarBody geosrs:Moon geosrs:NaturalSatellite geosrs:Planet geosrs:PlanetStatus geosrs:Plutoid geosrs:Star geosrs:Satellite return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:ArtificialSatellite geosrs:Asteroid geosrs:Comet geosrs:DwarfPlanet geosrs:InterstellarBody geosrs:Moon geosrs:NaturalSatellite geosrs:Planet geosrs:PlanetStatus geosrs:Plutoid geosrs:Star geosrs:Satellite |
A.8. Conformance Class: Instances
| Identifier | /conf/instances |
|---|---|
| Requirements class | Requirements class 8: /req/instances |
| Conformance tests | Abstract test A.41: /conf/instances/Coordinate_System_Axis Abstract test A.42: /conf/instances/Spheroids Abstract test A.43: /conf/instances/SRS_Literal_Types |
A.8.1. Coordinate System Axis
| Identifier | /conf/instances/Coordinate_System_Axis |
|---|---|
| Requirement | Requirement 41: /req/instances/Coordinate_System_Axis |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:Down geosrs:East geosrs:North geosrs:South geosrs:Up geosrs:West return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:Down geosrs:East geosrs:North geosrs:South geosrs:Up geosrs:West |
A.8.2. Spheroids
A.8.3. SRS Literal Types
| Identifier | /conf/instances/SRS_Literal_Types |
|---|---|
| Requirement | Requirement 42: /req/instances/SRS_Literal_Types |
| Test purpose | Check conformance with this requirement |
| Test method | Verify that queries involving geosrs:proj4Literal geosrs:projJSONLiteral geosrs:wktLiteral return the correct result on a test dataset. |
| Test-method-type | Capabilities |
| Reference | geosrs:proj4Literal geosrs:projJSONLiteral geosrs:wktLiteral |
Annex B
(informative)
Alignments
Overview
The prefixes used for the ontologies mapped to in all following sections are given in the following table.
Table B.1 — Alignment: Namespaces
B.1. IGN Ontology
Table B.2 — Alignment: IGN Ontology
B.2. ISO19111 Ontology
Table B.3 — Alignment: ISO19111 Ontology
B.3. IFC Ontology
Table B.4 — Alignment: IFC Ontology
Annex C
(informative)
SHACL Shapes
This section introduces SHACL shapes which can be used to verify graphs encoded using the vocabulary defined in this specification.
Overview
SHACL shapes in this specification are subdivided by the same module designations as used previously. In order to verify a graph a single validation file of SHACL shapes is provided alongside this specification.
C.1. SHACL Shapes: Core
Table — Core
| Label | TargetNode | Property | Class | MinCount | MaxCount | Comment |
|---|---|---|---|---|---|---|
| Shape S1 | geosrs:CRS | geosrs:coordinateSystem | geosrs:CoordinateSystem | 1 | 1 | A coordinate reference system should have exactly one coordinate system |
| Shape S2 | geosrs:CRS | geosrs:domainOfValidity | geosrs:AreaOfUse | 1 | - | A coordinate reference system should have at least one area of use |
| Shape S3 | geosrs:CRS | geosrs:datum | geosrs:Datum | - | 1 | A coordinate reference system should have exactly one datum |
| Shape S4 | geosrs:CRS | geosrs:datumEnsemble | geosrs:DatumEnsemble | - | 1 | A coordinate reference system may have exactly one datum ensemble |
| Shape S5 | geosrs:CompoundCRS | geosrs:includesSRS | geosrs:SingleCRS | 1 | - | A compound coordinate reference system should consist of at least one single coordinate reference system |
| Shape S6 | geosrs:GeodeticCRS | geosrs:coordinateSystem | geosrs:GeodeticCoordinateSystem | 1 | 1 | A geodetic coordinate reference system should have exactly one geodetic coordinate system |
| Shape S7 | geosrs:GeographicCRS | geosrs:datum | geosrs:GeodeticDatum | 1 | 1 | A geographic coordinate reference system should have exactly one geodetic datum |
| Shape S8 | geosrs:GeographicCRS | geosrs:coordinateSystem | geosrs:EllipsoidalCoordinateSystem | 1 | 1 | A geographic coordinate reference system should have exactly one ellipsoidal coordinate system |
| Shape S9 | geosrs:ParametricCRS | geosrs:datum | geosrs:ParametricDatum | 1 | 1 | A parametric coordinate reference system should have exactly one parametric datum |
| Shape S10 | geosrs:ProjectedCRS | geosrs:conversion | geosrs:Conversion | 1 | - | A projected coordinate reference system should have at least one conversion |
| Shape S11 | geosrs:SingleCRS | geosrs:coordinateSystem | geosrs:CoordinateSystem | 1 | 1 | A single coordinate reference system should have exactly one coordinate system |
| Shape S12 | geosrs:SingleCRS | geosrs:datum | geosrs:Datum | 1 | 1 | A single coordinate reference system should have exactly one datum |
| Shape S13 | geosrs:TemporalCRS | geosrs:datum | geosrs:TemporalDatum | 1 | 1 | A projected coordinate reference system should have exactly one temporal datum |
C.2. SHACL Shapes: Datum
Table — Datum
| Label | TargetNode | Property | Class | MinCount | MaxCount | Comment |
|---|---|---|---|---|---|---|
| Shape S1 | geosrs:ParametricDatum | geosrs:definingParameter | geosrs:DefiningParameter | 1 | - | A parametric datum should have at least one defining parameter |
C.3. SHACL Shapes: Cs
Table — Cs
| Label | TargetNode | Property | Class | MinCount | MaxCount | Comment |
|---|---|---|---|---|---|---|
| Shape S1 | geosrs:1DCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 1 | 1 | A 1D coordinate system should have exactly one axis |
| Shape S2 | geosrs:3DCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 3 | - | A 3D coordinate system should have at least three axes |
| Shape S3 | geosrs:ConicalCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 3 | - | A conical coordinate system should have at least three axes |
| Shape S4 | geosrs:CoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 1 | - | A coordinate system should have at least one axis |
| Shape S5 | geosrs:CoordinateSystemAxis | geosrs:axisDirection | geosrs:AxisDirection | 1 | 1 | A coordinate system axis should have exactly one axis direction |
| Shape S6 | geosrs:CurvilinearCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 3 | - | A curvilinear coordinate system is defined in Euclidean space and should therefore have at least three axes |
| Shape S7 | geosrs:CylindricalCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 3 | - | A cylindrical coordinate system should have at least three axes |
| Shape S8 | geosrs:DateTimeTemporalCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 1 | 1 | A date time temporal coordinate system should have exactly one axis |
| Shape S9 | geosrs:PlanarCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 2 | - | A planar coordinate system should have at least two axes |
| Shape S10 | geosrs:TemporalCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 1 | 1 | A temporal coordinate system should have exactly one axis |
| Shape S11 | geosrs:TemporalCountCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 1 | 1 | A temporal count coordinate system should have exactly one axis |
| Shape S12 | geosrs:TemporalMeasureCoordinateSystem | geosrs:axis | geosrs:CoordinateSystemAxis | 1 | 1 | A temporal measure coordinate system should have exactly one axis |
Annex E
(informative)
JSON-LD Context
We provide JSON-LD contexts to be compatible with other JSON-based formats which provide coordinate reference system data.
Overview
E.1. Compatibility to PROJJSON
PROJSON is an established format to share geospatial data which has emerge from the PROJ library and encodes the WKT encoding of coordiante references systems. By adding a JSON-LD context to the PROJJSON standard we achieve an immediate compatibility with an established standard simply by extending it by one simple statement.
{
"@context": "https://opengeospatial.github.io/ontology-crs/context/geosrs-context.json",
"$schema": "https://proj.org/schemas/v0.7/projjson.schema.json",
...
}Listing E.1
We provide examples of application of this JSON-LD context with the distribution of this standard.
E.2. Compatibility to OGCJSON
The OGC CRS working group is aiming towards the creation of their own JSON format for CRS. The JSON-LD context we provide aims to be compatible with both PROJJSON and OGCJSON.
Annex F
(informative)
Revision History
| Date | Release | Author | Primary clauses modified | Description |
|---|---|---|---|---|
| 2016-04-28 | 0.1 | G. Editor | all | initial version |
Bibliography
NOTE: The TC has approved Springer LNCS as the official document citation type. Springer LNCS is widely used in technical and computer science journals and other publications For citations in the text please use square brackets and consecutive numbers: [1], [2], [3] Actual References: [n] Journal: Author Surname, A.: Title. Publication Title. Volume number, Issue number, Pages Used (Year Published)
[1] ISO: ISO 19142, Geographic information — Web Feature Service. International Organization for Standardization, Geneva https://www.iso.org/standard/42136.html.
[2] W3C: Data Catalog Vocabulary, W3C Recommendation 16 January 2014, https://www.w3.org/TR/vocab-dcat/
[3] IANA: Link Relation Types, https://www.iana.org/assignments/link-relations/link-relations.xml
[4] W3C/OGC: Spatial Data on the Web Best Practices, W3C Working Group Note 28 September 2017, https://www.w3.org/TR/sdw-bp/
[5] W3C: Data on the Web Best Practices, W3C Recommendation 31 January 2017, https://www.w3.org/TR/dwbp/
[6] Ben-Kiki, O., Evans, C., Ingy döt Net: YAML Ain’t Markup Language, https://yaml.org/
[7] OGC: Web Feature Service 2.0, http://docs.opengeospatial.org/is/09-025r2/09-025r2.html
[8] Berners-Lee, T., Fielding, R., Masinter, L.: IETF RFC 3986 — Uniform Resource Identifier (URI): Generic Syntax, http://tools.ietf.org/rfc/rfc3986.txt
[9] Clementini E, Cohn AG: Extension of RCC*-9 to Complex and Three-Dimensional Features and Its Reasoning System. ISPRS International Journal of Geo-Information vol. 13 no. 1, p. 25 (2024).